vervepipes
I'm Awesome
- Joined
- Sep 15, 2011
- Messages
- 229
- Reaction score
- 3
got my overhead console and updated reading lamps in today, checked them while they were hanging and they worked. Screwed the lamp fixture into place and once the lamp was up it was no longer working and the fuze popped. I replaced the fuze after dropping the lamp down again and all seemed well in there, but nothing in the illumination circuit works, even with a test light right at the fuze block(tried the test light both with and without a fuze). So nothing even at the fuze block, suggestions on where to go from here??