I made _______ for my GMT400

[Mercy]

Put a ipad in the dash to replace the radio

You must be registered for see images attach

 

[Dmgmc]

I made a console to hold my cb radio and 12 volt outlets. I planned on adding something to clean up the edges around the holes but I'm abandoning this project (throwing it in the trash). The carpet is loose now so it's baggy, it has a stain on the side, the 12V outlets only work when they want (which is hardly ever), so I'm just going to mount it to the transmission hump

You must be registered for see images attach

You should just mount your cb to the side of your center console with Velcro or double sided tape... Or you can be difficult and find a place in the dash like I did.. I've got a 12v socket I hooked up in there too

 

[95C1500]

You should just mount your cb to the side of your center console with Velcro or double sided tape... Or you can be difficult and find a place in the dash like I did.. I've got a 12v socket I hooked up in there too

I did

You must be registered for see images attach

 

[Dmgmc]

Hey that's mounted kinda like mine I took out the ashtray completely though.. same cb as Me I think

 

[95C1500]

Cobra 25 LTD classic?

 

[Dmgmc]

I Think mines the 29 but close enough haha

 

[95C1500]

I wish I had the 29. The built in swr meter would've been a cool thing to have haha

 

[Dmgmc]

I just bought it used like 6 months ago used I'm not even sure what swr is hah

 

[95C1500]

oh haha. It's "standing wave ratio". It has something to do with the waves reaching the antenna. You have to tune the antenna properly so you won't burn up your cb

 

[Dmgmc]

Yeah I heard that I was supposed to do that... But honestly I don't use it much anymore so I'm thinking of getting rid of it anywaysb