Help for a newbie...

[Schwarzweix]

Do i need to replace the rear axles position when I do a 4 inch drop on the rear with an shakle and hanger kit? Is it necessary to put a c-notch in the frame or would it fit just as it is?

I want to buy these parts from Summit when I am over there:

Front 3":
Shocks: DJM 1315
Springs: Western Chassis 881530

Rear 4":
Shocks: DJM 2200
Hanger and Shackle Kit: Western Chassis 201503

You must be registered for see images attach

Would it fit without any problems (exept camber / caster / toe in)

Thanks for help & BR

 

[dagen_1]

Do i need to replace the rear axles position when I do a 4 inch drop on the rear with an shakle and hanger kit? Is it necessary to put a c-notch in the frame or would it fit just as it is?

I want to buy these parts from Summit when I am over there:

Front 3":
Shocks: DJM 1315
Springs: Western Chassis 881530

Rear 4":
Shocks: DJM 2200
Hanger and Shackle Kit: Western Chassis 201503

You must be registered for see images attach

Would it fit without any problems (exept camber / caster / toe in)

Thanks for help & BR

re-check your numbers on the front coil springs. i've only seen 2" drop springs available for our trucks. (although some people cut them down further)

 

[Rick1991]

re-check your numbers on the front coil springs. i've only seen 2" drop springs available for our trucks. (although some people cut them down further)

Beltech makes a 3" for sure and so does djm. Beltech's come with a little plastic spacer that you can put in to only make. 2" drop though.

 

[Schwarzweix]

hm - thats interesting. I searched again and this is the result:

You must be registered for see images attach

 

[phule]

Double check the part numbers on western chassis web site. I've corrected summit a couple times on them

Adam

 

[Schwarzweix]

ok, thanks a lot for that hint... That will protect me against unnecessary work and much complications... Europe / US isnt not so easy to re-send / change wrong sent parts.

So, someone can help me with my question about the rear axle? :-D