engine swap

[hipasschev94]

Must have a monster of a engine I that camaro to have a 950DP!! Specs?

i dont know big details because my dad built it when i was little but the motor is a completly built 454, ill ask him about it later when he gets home and ill nab a few pictures to, but then the tranny he build is a TH400 with a hurst slap stick shift kit and a line lock, that car is a beast lol he built it for the strip when he was still working on it

 

[hipasschev94]

Demon's aren't bad, i run a older one on my '94. but its just a fancy holley. I run a Holley 750 on my drag car and my pop's run a Holley 850DP on his '69 Camaro with a BBC. ive never have liked edelbrock.

you need to pick which cam before anything else really, make sure all the RPM ranges are about the same spec wise, it all depends what you plan to do with the truck.

BTW, Holley owns Demon carbs, they are no longer owned by Barry Grant, after they went bankrupt in 2011.

What kind of pistons does this summit kit include? Compression Ratio?

i don't think you get the term "straight pipe", if you are running glass packs you are no longer "straight pipe".

Dual 3" is WAY to big, you will loose power, 2.5" is even pushing it.

would you be able to give me a quick 101 on cams? these are the rebuild kits i found from summit http://www.summitracing.com/search/...cluded/yes?SortBy=Default&SortOrder=Ascending
but ive also found this that im really liking all thats included in the kit http://www.northernautoparts.com/ProductDetail.cfm?ProductId=2921

 

[FastOrange]

would you be able to give me a quick 101 on cams? these are the rebuild kits i found from summit http://www.summitracing.com/search/...cluded/yes?SortBy=Default&SortOrder=Ascending
but ive also found this that im really liking all thats included in the kit http://www.northernautoparts.com/ProductDetail.cfm?ProductId=2921

honestly no, you need to do alot of research when it comes to picking the cam.

i would use the second link.

why not go 383?

 

[TylerZ281500]

remember to shave the block and use a sbc cam on a 383 if you go that way.