I have a very original clean 2wd c1500 literally a 8-10k truck . I haven’t had it long I just did a 4 inch spindle lift all my ball joints and tie rods etc are all new.
The calipers look and seemed to be in good shape / the brake pads were looking ok 75% life / I had a little issue with the slide pins sticking I greased them . Issue I’m having is light braking is ok heavy braking get a partial death wobble . I feel like it could be rotors maybe bad and slide pins acting up . There are no loose components everything from the root bearings ball joints spindle nuts caliper boos everything is new or good and tight .
17” wheels granted I have 33x12.50s tires regardless of the size should be firm clean stop even on heavy braking . Any ideas or best guesswork? I always was told look at rotor issues when ever a wobble occurrs on braking
The calipers look and seemed to be in good shape / the brake pads were looking ok 75% life / I had a little issue with the slide pins sticking I greased them . Issue I’m having is light braking is ok heavy braking get a partial death wobble . I feel like it could be rotors maybe bad and slide pins acting up . There are no loose components everything from the root bearings ball joints spindle nuts caliper boos everything is new or good and tight .
17” wheels granted I have 33x12.50s tires regardless of the size should be firm clean stop even on heavy braking . Any ideas or best guesswork? I always was told look at rotor issues when ever a wobble occurrs on braking