I built this a while back and never got around to posting up pictures, so here they are! The goal of the build was to get as much bass as I could from an under the seat box.
I used a Skar 1200.1 amp and two SoundQubed HDS10's, ran with 0awg welding cable and a solid battery.
I lifted the rear seats 2" to get enough clearance for the box. It's just under 1cube per side, really small I know!
I had to notch the back of the square tube to get the bottom nut secured, no other way to reach it!
The old sony xplods well, xploded.
Here I took a 6" (I believe) piece of PVC pipe, and made my own flares using a heat gun and a metal lamp shade. I know the audiophiles will point out port end clearance, and it is not enough, but I was determined!
Almost there...
I used a Skar 1200.1 amp and two SoundQubed HDS10's, ran with 0awg welding cable and a solid battery.
I lifted the rear seats 2" to get enough clearance for the box. It's just under 1cube per side, really small I know!
You must be registered for see images attach
I had to notch the back of the square tube to get the bottom nut secured, no other way to reach it!
You must be registered for see images attach
You must be registered for see images attach
The old sony xplods well, xploded.
Here I took a 6" (I believe) piece of PVC pipe, and made my own flares using a heat gun and a metal lamp shade. I know the audiophiles will point out port end clearance, and it is not enough, but I was determined!
You must be registered for see images attach
Almost there...
You must be registered for see images attach