The shaft is gm #26015779. You're gonna need a bolt for the u-joint, gm #11610555. You can use your upper bolt
Did not know about the bolt, I hope it's not some kind of special one. Is it a bolt or a screw?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The shaft is gm #26015779. You're gonna need a bolt for the u-joint, gm #11610555. You can use your upper bolt
GM bolt for 3500 steering shaft, vs. shorter, original bolt.Did not know about the bolt, I hope it's not some kind of special one. Is it a bolt or a screw?
Steering box rebuilds / etc...
Anybody ever use Turn One in Saginaw, MI to rebuild their steering gear? Reportedly the guys there used to work with Saginaw Steering Gear div of GM.
Turn One - Performance Power Steering
Turn One manufactures high performance power steering components for street and race vehicles. Drive confidently with performance products!turnonesteering.com
Sorta seems appropriate to go "back to the source" when in need of a box rebuild, but maybe I'm just being silly.
Rag joints...
I replaced the rag on my 1998 K1500 Suburban with this one:
Flaming River FR1746DD Billet-Joint 1"-DD X 3/4"-30 Steering U-Joint
xc_hide_links_from_guests_guests_error_hide_media
I've also used this one, a bit cheaper, on my 1995 S10 Blazer:
Borgeson 015231 1" DD x 3/4"-30 Steering U-Joint
xc_hide_links_from_guests_guests_error_hide_media