Whitelightning1500
Newbie
New to forums,
I have a 97k1500 with a 383 stoker with a 4L60e in it. I have ran into some issues when carb swapping it and in need of advise. I have already installed new intake, hei distributor and carb. I am running a Edelbrock 700. I have also ordered a US shift edelbrock TPS kit. I have already installed a fuel regulator because I am going to run the stock fuel pump for now. I am struggling in figuring out throttle cables. I have read that you can still run the stock cables and bracket but haven't found how it can be possible.
Looking to see if others have done this and found a way to make this work. Also if others have advice or guidance for me so I don't make stupid mistakes that others have learned from.
Thank you in advance.
I have a 97k1500 with a 383 stoker with a 4L60e in it. I have ran into some issues when carb swapping it and in need of advise. I have already installed new intake, hei distributor and carb. I am running a Edelbrock 700. I have also ordered a US shift edelbrock TPS kit. I have already installed a fuel regulator because I am going to run the stock fuel pump for now. I am struggling in figuring out throttle cables. I have read that you can still run the stock cables and bracket but haven't found how it can be possible.
Looking to see if others have done this and found a way to make this work. Also if others have advice or guidance for me so I don't make stupid mistakes that others have learned from.
Thank you in advance.