Gotcha. Definitely don't have that. Would have been a good place to hook my chain, when I pulled the engine.Here is a pic of the old one for reference
It’s the one that is black in color
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gotcha. Definitely don't have that. Would have been a good place to hook my chain, when I pulled the engine.Here is a pic of the old one for reference
It’s the one that is black in color
The rear bracket on the alternator?Here is a pic of the old one for reference
It’s the one that is black in color
That is correctThe rear bracket on the alternator?
There's a bracket that mounts on the hydro booster bolts, where the master cylinder attaches, that holds the lines for the hydro boost unit and the big wiring harness at the rear of the engine. This didn't get reinstalled on my truck because the locknuts on the master cylinder bolts cover up all the threads. At least that's what it looks like to me; I found it laying on the top of the driver's side upper control arm and crossmember, some time after the unit was replaced.....The bracket is different between the vacuum and hydroboost brakes due to the return line on the hydro pump