95 GMC rclb

[barsaloubca]

I thought id start a build thread. It will ne a work in progress over the next few years keepong the truck driveable throughout.

Sent from my SGH-I337M using Tapatalk

 

[barsaloubca]

Here are some pics b4 and after tire change.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images

Sent from my SGH-I337M using Tapatalk

 

[barsaloubca]

Here's after

You must be registered for see images

You must be registered for see images

You must be registered for see images

Sent from my SGH-I337M using Tapatalk

 

[barsaloubca]

Steering wheel before

You must be registered for see images

Sent from my SGH-I337M using Tapatalk

 

[barsaloubca]

And after

You must be registered for see images attach

Yes the odometer reads 499209. Km. Im the 3rd owner. It had a tranny put in not quite a year ago at about 490 000 km.

Sent from my SGH-I337M using Tapatalk

 

[barsaloubca]

Been a while since I posted. This trucks is at 512 000k but the tranny is screwed I only got reverse 1st and 2nd. It won't go over 65 km/h. So i parked it for now. I added a air horn to it and upgraded the stereo and added sound deaden er. It's gonna sit for the winter until I am ready for motor tranny swap. I got another couple trucks for parts and fixing. The first one I got is a 03 3/4 ton with a 6L it was a kaltire service truck so it has an engine mounted air compressor and a hydraulic tail gate and I'll use it for a trailer and donor motor/tranny in the other truck I got. The other truck I got 2 weeks ago is a 93 rcsb with only 216000km on it. I put new cab corners on it ( my 1st time doing welds on truck body's.) I still need to change the drivers side front fender. it has the infamous gm peely paint unfortunately. The truck is otherwise rust free.

Sent from my SM-G900W8 using Tapatalk

 

[barsaloubca]

Pics don't wanna go past 70% loading right now will add when I can

 

[barsaloubca]

Only b4 pick I have of the 93

You must be registered for see images attach

Sent from my SM-G900W8 using Tapatalk

 

[barsaloubca]

Some cab corner pics b4 during and after

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

it rusted through the second layer so I patched it up b4 putting the new one on

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

it got dark so I bombed it till I could finish

Sent from my SM-G900W8 using Tapatalk

 

[barsaloubca]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

took my rims off my 95

You must be registered for see images attach

put them on my 93. Also truck had front lowering springs and shocks in it when I bought it and came with the rear hanger and shackle I think it's a 3/4" drop kit. Not 100% sure but is better than factory height

Sent from my SM-G900W8 using Tapatalk