93SierraWT
Greater Made Chevy
Made this build thread a while ago and never did anything with it, so I decided to finally get it going.
Modifications:
- 2" cowl induction hood
- Black powder-coat Westin step bars
- True dual exhaust with Magnaflow mufflers and chrome turn-downs
- 1" lift blocks in the back, leveled in the front
- Gap guards
- Chrome rear differential cover
- 17" Chrome Cragar Soft 8s with 265/70 Goodyear Wrangler tires
- Trifecta folding tonneau cover
- Rear window louvers
- Molded in roll pan
- Billet grille insert
- Shaved and color-matched front bumper
- Shaved antenna
- TYC heads and tails
- 6000K HID low beams
- Clear corners
- Corner lights and dash lights converted to LED
- LED rear license plate light
- LED dome light
- Painted two years ago (new inner and outter fenders, core support, quarter panels, cab corners, rocker panels, tailgate, body mounts and door pins)
- Debadged
- Red/black "Chevrolet" badges from Classic Industries
- Red/silver Z71 decals
- Red bow-tie center cap decals
- 73 - 87 Chevy high rise bucket seats and matching console
- 73 - 87 Chevy transfer case shifter boot
- 73 - 87 Chevy chrome gear selector
- Chrome wiper/turn signal lever
- Aftermarket tachometer
- Grant steering wheel
- Billet gauge overlay
- Kenwood deck with Pioneer speakers, along with a Dual amp and 6x9s behind the seats
- Tinted windows
- Ventshades
- 94 - 98 mirrors
- 94 - 98 grille
- 94 - 98 wiper arms
- Smoothed and polished throttle body
- Injector pod spacer
- Throttle body spacer
- Hypertech TBI powercharger
- B&M ShiftPlus Electronic Shift Improver
- B&M chrome finned transmission pan with extra 3 qt capacity
- Jet Stage 2 chip
- 180 degree thermostat
- EGR delete
- MSD coil, wires, distributor and rotor
- E3 Spark plugs
- K&N lid and filter
- Chrome water neck and wing nut valve cover bolts
- B&M ShiftPlus electronic shift improver
- Rough Country steering stabilizer
- Monroe shocks with Pro Comp shock boots
- Entire frame has been sanded, primed and rocker guarded
- New windshield
- 2WD Valance
- New OEM grille emblem
- New OEM wiper cowl
Other things I have done include replacement of all brake lines and all braking components, new radiator and core support, body mounts, new upper and lower ball-joints, inner and outer tie rods, new wheel bearings, new gas tank and pump, new universal joints on front and rear shaft, flushing and replacement of all fluids and filters, and other miscellaneous maintenance related things.
Modifications:
- 2" cowl induction hood
- Black powder-coat Westin step bars
- True dual exhaust with Magnaflow mufflers and chrome turn-downs
- 1" lift blocks in the back, leveled in the front
- Gap guards
- Chrome rear differential cover
- 17" Chrome Cragar Soft 8s with 265/70 Goodyear Wrangler tires
- Trifecta folding tonneau cover
- Rear window louvers
- Molded in roll pan
- Billet grille insert
- Shaved and color-matched front bumper
- Shaved antenna
- TYC heads and tails
- 6000K HID low beams
- Clear corners
- Corner lights and dash lights converted to LED
- LED rear license plate light
- LED dome light
- Painted two years ago (new inner and outter fenders, core support, quarter panels, cab corners, rocker panels, tailgate, body mounts and door pins)
- Debadged
- Red/black "Chevrolet" badges from Classic Industries
- Red/silver Z71 decals
- Red bow-tie center cap decals
- 73 - 87 Chevy high rise bucket seats and matching console
- 73 - 87 Chevy transfer case shifter boot
- 73 - 87 Chevy chrome gear selector
- Chrome wiper/turn signal lever
- Aftermarket tachometer
- Grant steering wheel
- Billet gauge overlay
- Kenwood deck with Pioneer speakers, along with a Dual amp and 6x9s behind the seats
- Tinted windows
- Ventshades
- 94 - 98 mirrors
- 94 - 98 grille
- 94 - 98 wiper arms
- Smoothed and polished throttle body
- Injector pod spacer
- Throttle body spacer
- Hypertech TBI powercharger
- B&M ShiftPlus Electronic Shift Improver
- B&M chrome finned transmission pan with extra 3 qt capacity
- Jet Stage 2 chip
- 180 degree thermostat
- EGR delete
- MSD coil, wires, distributor and rotor
- E3 Spark plugs
- K&N lid and filter
- Chrome water neck and wing nut valve cover bolts
- B&M ShiftPlus electronic shift improver
- Rough Country steering stabilizer
- Monroe shocks with Pro Comp shock boots
- Entire frame has been sanded, primed and rocker guarded
- New windshield
- 2WD Valance
- New OEM grille emblem
- New OEM wiper cowl
Other things I have done include replacement of all brake lines and all braking components, new radiator and core support, body mounts, new upper and lower ball-joints, inner and outer tie rods, new wheel bearings, new gas tank and pump, new universal joints on front and rear shaft, flushing and replacement of all fluids and filters, and other miscellaneous maintenance related things.
Last edited: