when i put my york on back in april, i over-tightened and stripped a bolt hole... i needed to truck to be functional at the time for a show so i put some loc-tite on the bolt and hoped it would hold. well, it didn't. the bolt backed out and the pressure of the serp. belt sorta pulled on the york's bracket a bit and the stress finally cracked/broke one of the brackets.... today i pulled the york, installed a helicoil and welded a piece of flat stock to the bracket. i'll paint it and throw it back together in the morning.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach