88-98 Bucket seat alternatives

[BHBurban]

Pro-Car seats = buckets? If so, you would probably have to use the bucket seat risers. The bench seat riser would only give you the outer sides.

You would then need a second set of risers from another bench (remove the cross bars) or one more bucket riser.


Sent from a rotary payphone

 

[AlbertRacingEngines]

Yeah there buckets, more like racing seats, summit offers the bracket for my truck model. I just wondered if there would be enough with the bench brackets to fab something up

 

[AlbertRacingEngines]

the bracket that summit offers is for those seats...i guess i just need the risers so im not sitting in the floor right?

 

[Darkrider]

Quick question...i know where there is a yukon with buckets and a console. The buckets have their own arm rests on them and the yukon in question has the older 88-94 interior. Now the question is does my 89 extended cab have the holes in the floor to install the pass side bucket?

Powered by Detroit Diesel

 

[1997chevydriver]

Quick question...i know where there is a yukon with buckets and a console. The buckets have their own arm rests on them and the yukon in question has the older 88-94 interior. Now the question is does my 89 extended cab have the holes in the floor to install the pass side bucket?

Powered by Detroit Diesel

IIRC you have to drill the inside bolt holes for both seats.

Sent from somewhere in MN

 

[Darkrider]

IIRC you have to drill the inside bolt holes for both seats.

Sent from somewhere in MN

Hmmm ok...well drivers side I wont have to since I have a 60/40 seat with drivers side lowback bucket seat.

Powered by Detroit Diesel

 

[1997chevydriver]

Hmmm ok...well drivers side I wont have to since I have a 60/40 seat with drivers side lowback bucket seat.

Powered by Detroit Diesel

If ds is the shorter seat then you have to drill the inside bolts for passenger seat

Sent from somewhere in MN

 

[Darkrider]

If ds is the shorter seat then you have to drill the inside bolts for passenger seat

Sent from somewhere in MN

Cool thanks for the info! Either im going to get those buckets and build a custom center console or track down a power drivers seat and its harness like whats in the diesel.

Powered by Detroit Diesel

 

[tom_h]

I'd love to install this type of seating pictured below, into my 1994 K1500 Blazer. Right now, I have a manual 60/40 bench -- the "60" is on the passenger side, the driver side is "40", and there is no flip-down armrest/console.

• What types of vehicle are seats below found in?
• Does that seat have any special name or RPO # ?
• What would I ask for at the salvage yard ?

You must be registered for see images attach

 

[ccreddell]

96 up extra cabs had them.