$600 2000 C3500 CCLB

[98chevy2500SS]

I would assume so, they're just a little cheaper because they don't have the extra CD features.

 

[frito-bandito]

Another question, is there any way to tell the gear ratio on a 14 bolt full float dually rear end without pulling the cover if the RPO code decal is missing?

 

[Frank Enstein]

Yes.
Jack up the axle off the ground and put jack stands under the axle so you can pull out the jack.

Mark both tires and the driveshaft.

Rotate both tires exactly one turn and count the turns of the driveshaft. That will get you close enough to figure it out.

Alternately, you can lift 1 tire off the ground and turn it 2 revolutions to get the same result.

 

[Supercharged111]

Yes.
Jack up the axle off the ground and put jack stands under the axle so you can pull out the jack.

Mark both tires and the driveshaft.

Rotate both tires exactly one turn and count the turns of the driveshaft. That will get you close enough to figure it out.

Alternately, you can lift 1 tire off the ground and turn it 2 revolutions to get the same result.

Bear in mind with this procedure, it is likely that one wheel will spin forward and the other backward.

 

[1ton-o-fun]

Or I could run the VIN and tell you what it came with. -If you trust that it's still original.

 

[frito-bandito]

Me and one of my employees trying to live in the 90s lol

You must be registered for see images attach

 

[Frank Enstein]

Me and one of my employees trying to live in the 90s lol

You must be registered for see images attach

Be careful parking that close to a Ferd! You don't want to get any on you!

 

[frito-bandito]

Finally! Officially starting the next phase of this project!! More to come!

You must be registered for see images attach

You must be registered for see images attach

 

[Dahead76]

Dually conversation? Do it! I’ve been slowly converting mine for the last year.

 

[frito-bandito]

Dually conversation? Do it! I’ve been slowly converting mine for the last year.

Yes!! I’ve been wanting to do this for a while!!