2wd RC 4" lift... What wheels

[Ruger_556]

If I'd do a 6 lug swap at the same time and wanted to run 16" wheels what's the most backspacing I can get away with? What about 15's? I'd like to keep them almost tucked if possible. Pics if you're close.



Sent from my RM-917_nam_usa_100 using Tapatalk

 

[phule]

Year: 1997
Make: Chevrolet
Model: Silverado C1500
Gear size: Yukon 4.11's and a G80 (with a Z71 rearend)
Tires: 285/70/17 BFG Rugged Terrains
Wheel Size: 2010 NNBS 17's
Lift kit size and Brand: 4" Rough Country spindle lift
Coil Spacers: None
Wheel Spacers: 1/4" front and 1.5" rear
Lift Blocks: 2" nbs block
Add-A-Leafs: None
Body Lift: None
Aftermarket Bumpers: None
Fender Height Measurements: 37 Front & 37.5 Rear
Any fender or body trimming needed?: Zero trimming & zero rubbing
Extra Comments: used Z71 rearend to widin track width with the front. also used light duty 6lug rotors in the front.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Find out the offset of that wheel plus 1/4 spacer


Sent from my Kindle Fire using Tapatalk 2

 

[cjman250]

Find out the offset of that wheel plus 1/4 spacer


Sent from my Kindle Fire using Tapatalk 2

The offset I believe is like 5 1/4 in. It's in his build thread

Sent from my awesome S5

 

[Ruger_556]

Thanks guys! So 16x8 with 4.5bs should work right?

 

[SCOTTYINWV]

4" spindle lift
15x8 rally's
32x11.50s

You must be registered for see images

You must be registered for see images

You must be registered for see images

 

[Ruger_556]

Anyone know what the minimum center bore is for using the 6 lug rotors?