I suppose it’s time for a forward progress update. For over a year, I had a nonfunctional DIC installed in my overhead console. It flickered to life once for about 30sec and never since. When I could muster the gumption, I’d check and recheck the wiring, thinking that had to be the issue. Fed up, I really tore into this past weekend. I had gotten another DIC recently and tried that one and nothing. WTF! I took apart both and there it was. GM cold soldering strikes again.
The “chip” labeled 430 in the upper right near the caps had a broken solder joint. Reflowed the soldier, and they both work now.
Note: The DIC pictured is from a short console sunroof Olds Bravada and has a separate compass module. Make sure you grab that too or the compass will not work.
The “chip” labeled 430 in the upper right near the caps had a broken solder joint. Reflowed the soldier, and they both work now.
Note: The DIC pictured is from a short console sunroof Olds Bravada and has a separate compass module. Make sure you grab that too or the compass will not work.
You must be registered for see images attach