1994 ECSB Cheyenne Build and Introduction!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

94Cheyenne

W/T 4 Life...
Joined
Nov 30, 2013
Messages
549
Reaction score
13
Location
Huntington Beach, CA
Hey all, The names Addison Babinski
I've been a long time lurker, and finally joined up!
My dad purchased this 94 ecsb Cheyenne 2x4 brand new and I've had it for the last 5 years.
been doing lots of things to it I have lots of time on my hands and WAY too much energy. I love the gmt400's and this is a kinda weird puppy... It's nickname is the stormtrooper...

RPO's list:
3.42's , 4.3l v6 LB4 w/balance shaft, 4l60E, 2500 Driveshaft and rear springs, Factory Color matched painted grill (DAD s/o that one), Cheyenne package etc.

I live in so cal and travel to the midwest (Minnesota/North Dakota) very often. I wanted a rig that get good gas mileage and could still tear off into the dirt/mud whenever possible. I get on average 16-18 city and 20-23 highway and 12-18 towing.

Mod's done:
Cobra CB/PA
31x10.5x15 BFG A/T's on blacked out stock wheels
Daystar 2.5 spacers
Edelbrock 4.3l tbi intake mainifold
JBA stainless steel shorty headers
Full MSD Igintion; Billet distributer, blaster coil, 8.5mm wires and 607 box
Flowmaster 40 series dual exhaust for header back. x'ed.
Repaint a year ago from Summit white to Olympic White, w/black bowtie

Mod's that are on the list:
RC 4" spindles w/no rear blocks. (2500 rear springs are same as 2" blocks on stock)
Cold air intake mod (remove air box thangy)
33x12.50x15 bfg M/T's or A/T's don't know just yet.
Black Pro comp 98's or Centerline outlaw II's
Trutrac 3.73 diff
Ori Baja Challenger light bar w/ two kc lights
Smoke out taillights front reflectors and turn signals.
Trans temp A pillar gauge
Maybe a stereo someday (i have the factory radio cubby hole)
Black floormats and bucket seats.


Let me know what you guys think!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach


snagged this today for the cold air mod!
You must be registered for see images attach
 

94Cheyenne

W/T 4 Life...
Joined
Nov 30, 2013
Messages
549
Reaction score
13
Location
Huntington Beach, CA
Did a couple small things this last weekend....

Trolling CL i found this Fabtech ultimate 6" lift kit used for a $100 bucks.
FT Tubular uppers, stainless steel brake lines, stock lowers, FT 2" lift coil springs, and FT 4" lift spindles.


You must be registered for see images attach


super greasy but after about 4 hours of cleaning i came to this (a little more to go)

You must be registered for see images attach

You must be registered for see images attach


spent the cash and got 4 new moog ball joints and new poly bushings
started late friday night with the tear down, (sorry no pics)
finished saturday at 3pm and got it alighned at 4"

You must be registered for see images attach

You must be registered for see images attach


I figured well while i'm at it, sunday i did the intake silencer box removal mod and the RWAL box/dump valve mod as well.

You must be registered for see images attach

You must be registered for see images attach


And then I smoked the rear tail's and the front turns & reflectors.

You must be registered for see images attach



So I went from this: 2 inch doughnuts
You must be registered for see images attach



To this: +4 inches ( i ended up not using the lift springs and just kept the stock springs. I tried it with everything on and It was at full droop on the ground. I like the lift, no plan for anything in the rear just yet, I like the fact that the lift spindles/knuckles widened the wheel track in the front 3 inches overall, It really filled out the front fenders. Now it's time for a re gear and 33's.

You must be registered for see images attach


Also I got my last part in for my trans temp guage to install on the drivers A pillar.

You must be registered for see images attach


It was a busy weekend.:gr_grin:
 

95C1500

┌П┐(◣_◢)┌П┐
Joined
Jun 28, 2012
Messages
37,519
Reaction score
1,975
Location
Texas
the grille you have painted black would look :boobs:

You must be registered for see images attach


Very nice truck man! I'm subbing this!
 
Top