1990 5 speed SCSB. ?? On 6.0 swap

[99kon]

To answer to the original post, yes you can bolt 5 speed to LS engine. I have a 5.3L using the 5 speed in my 93. Use a 4.8L Flywheel and clutch kit.

You must be registered for see images attach

Im in the process of swapping it out as we speak. Got all the parts, but when i took the old TBI motor out i did not take off the stock motor mounts. Now i need to find some. Im hoping I can put in the 6.0 this weekend.

Thanks fellas

 

[DRAGGIN95]

Awesome, your going to love it!

 

[99kon]

Just some pics

You must be registered for see images attach

Surprise!!!!!!!!!!!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

5/7

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Bye Bye BLUE!

You must be registered for see images attach

You must be registered for see images attach

Swap headers

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[darren250r]

Awesome thread and pics!

 

[99kon]

Well been a while since I had even worked on her but I hav started on her again. Just couldn't let her sit there anymore. Some changes though. I'm going carb on the 6.0l
I did use a 4.8l flywheel, pilot bushing from a 2001 camaro and the stock clutch assembly for the trans.
Took some time and cleaned up the engine and installed the carb and intake.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[99kon]

Quick question
My truck has a return line. Of course I'm going carb so i won't need it. I can just cap it off and put it off to the side correct?
Got this in the mail today!

You must be registered for see images attach

 

[99kon]

Never mind i found my answer.
Guess i have a regulator for sale! What if i use the WIX corvette return style filter?
That should work!

 

[99kon]

So i got me the corvette fuel filter and got up to the regulator. Still need the fittings to go from -6 to the carburetor. Also go the wiring sorted out and managed to crank the motor over with the key. Got the headers installed, plugs, wires, oil cooler block off plate, new slave cylinder, water pump and some other misc things.

You must be registered for see images attach

 

[Mike]

Looks awesome, really clean

 

[99kon]

Thanks
been a long time coming to get to this point.
I would have it running this weekend but going on vacation the whole week so wont be able to work on it until week after next.
Cant wait to hear that motor running.