Search results

  1. rollin smoke

    Swapping 454 into a 1998 Chevy Silverado

    if you want a little better driveability then just use a 700r4. they have decent overdrive in them and there first gears are huge in them you could get away with a 355 gear in the rear and still have plenty of torque for the lowend. also just run straight to the gauges yourself and with the...
  2. rollin smoke

    Swapping 454 into a 1998 Chevy Silverado

    obviously you dont or this comment wouldnt have been posted. please prove me how you have experience then.
  3. rollin smoke

    Swapping 454 into a 1998 Chevy Silverado

    who is this referring to?
  4. rollin smoke

    Swapping 454 into a 1998 Chevy Silverado

    really gotta pull the pump? read my last post. hmm i run the stock style intake pump in my camaro with i a bypass regulator guess i did it wrong. no way huh? here you go to cover the pump situation. http://www.jegs.com/p/Aeromotive/Aeromotive-A1000-Carbureted-Bypass-Regulator/750089/10002/-1...
  5. rollin smoke

    here from michigan

    we'll be able to soon hopefully been busy with the new job and all. the truck is just sitting behind my house atm. only pulled a few more plugs off of the harness and thats about it. wanna find another vortec harness to start adding what i need to for my 6.0 swap so i can do it on a tight time...
  6. rollin smoke

    Swapping 454 into a 1998 Chevy Silverado

    i wont say what i want to about some posts already on this thread about big blocks. but ill say go for it. get a stock block find some 049s to port up and get a good intake and throw a cam in it right around .575 lift and you wont have a problem making power. i bet i could throw my big block in...
  7. rollin smoke

    here from michigan

    thanks me too!!! got a big list hopefully get my sas and my 6.0 swap done in the next couple months. got a new job and its been tying up a lot of my time. but just researching and gathering everything im gunna need. thanks another local!! hopefully well be able to meet up and chill sometime
  8. rollin smoke

    price of SAS??

    all depends on what route you go coilovers or leaf springs. i know that im gunna have atleast 1500 into just the coilovers so thats a good idea of what a coilover sas is gunna cost you. dana 44 or 60 all depends on what you wanna do with your truck and how hard you actually play in the truck...
  9. rollin smoke

    Camok10's sas 97 z71

    go jungle gym first and never look back imo. im sourcing some coilovers for my swap then im doing a 6.0 swap and a sas.
  10. rollin smoke

    Camok10's sas 97 z71

    your exactly right! i wouldnt pay that much for a junkyard axle. also im assuming the junkyard axle has drums instead of disc brakes. id sell you my 14 bolt ff for 350 with rotors calipers and all it has 4:10s in it out of my 05 2500hd.
  11. rollin smoke

    Truck inspection

    a good true duals always has a crossover pipe of some sort. if you run true duals without a crossover youre a fool or dont like good performing vehicles. its only kids with straight pipes that have true duals w/o a crossover is gunna be the one to argue you.
  12. rollin smoke

    here from michigan

    thanks!! its gunna get better just give it a few weeks and ill have more done on it. got a huge list of things to do just gotta get started on them lol.
  13. rollin smoke

    here from michigan

    driving a little to fast into a jog in the road got on the brakes and she instanly started sliding, slid for about 50 feet in the middle of the road and she slid into the grass the front tire hit the grass busted the bead the rim dug and she flipped. was going about 60ish when she started to...
  14. rollin smoke

    Truck inspection

    running no mufflers = HORRIBLE sounding exhaust!! i run true duals on my truck catless since i live in michigan and no inspections with flowmasters but theyre getting changed i dont like flowmasters if you run true duals run a crossover pipe it will help sound and balance out the banks of the...
  15. rollin smoke

    here from michigan

    yea it was a nice truck for sure!! got a pic of the new tires on the truck, they are badass tires and ride good and they are pretty quiet. got the back window tinted aswell but no before and after pic, hopefully get the others done tomorrow. i need to start a build thread.....
  16. rollin smoke

    Spare tire mounts? Custom, retro'd, bolt on?

    here you go! http://www.tiregate.com/
  17. rollin smoke

    Camok10's sas 97 z71

    beer and pizza you have all the help you need! lol yea if you dont mind id take is number i dont feel like repairing my doors.
  18. rollin smoke

    Camok10's sas 97 z71

    sweet youre not far from me at all. if you need a hand doing anything let me know id be more than glad to help you. i know exactly where saranac is i use to go to school there. got any more rust free doors? mine has a tiny bit of rust on the bottom of the doors only and i wanna make it complete...
  19. rollin smoke

    Camok10's sas 97 z71

    i know it works; i have/had a 05 crew cab 2500hd SASed on 40s i know they work and ride actually alright but if hes gunna start fresh mine aswell do an upgrade to radius arms or 4 link. but its only my opinion. the only reason i suggested coils cus its easy to switch over to coilovers in the...
  20. rollin smoke

    here from michigan

    i wish none for the brackets on these style trucks unfortunately. im just gunna upgrade to a bigger amp alternator anyways.
  21. rollin smoke

    here from michigan

    haha wouldnt expect you to lol. but i gotta replace the damn alternator tomorrow and pick up the MTRs so its kinda a win win day tomorrow. anyone a dealer on king coilovers or know anyone with some 14" or 16" coilovers for sale? im in the market for a little project on the truck.
  22. rollin smoke

    Carb to EFI swap on the Camaro. Engine build.

    i wouldnt even waste my money on a sbc. the ls based motors can make a whole lot more power. id only build a sbc if i were to use some 18 degree heads but thats just me. all honesty id go bbc you can make a load of power on a 496 with just some good stock ported heads.
  23. rollin smoke

    Camok10's sas 97 z71

    where in michigan are you located? as for 11" in the front and 10" of lift in the rear is gunna look horrible with only 37s. you only need like 9" max in the front to clear 37s. id personally just spend the dough and got right to coilovers. i wouldnt even mess around with that leaf spring stuff...
  24. rollin smoke

    here from michigan

    like youy color too!!! lol well got the tire part of my mods done!.... ordered a new set of MTRs today be here monday!!!! tint and hopefully cowl hood will be done next week too! got a lead on a cowl hood for cheap
  25. rollin smoke

    Suspension lift vs Crank and level

    sas are very easy theses days most kits are bolt on. you could do the swap in a weekend if you get all the lined up first. just dont skimp on the little things and everything will be all good. as in do drilled and tapped solid bar for draglink and tierod dont do that welded insert on the...

Latest posts

Staff online

Members online

... and 22 more.
Total: 1,698 (members: 72, guests: 1,626)

Forum statistics

Threads
64,527
Messages
1,395,960
Members
51,916
Latest member
nroberts84

Share this page

Top