Search results

  1. zraffz

    Wanted: Instrument Panel Connector Schematic

    Absolutely, thanks!
  2. zraffz

    Wanted: Instrument Panel Connector Schematic

    Does anybody have a pinout for the gauge cluster connector on a 1998 K2500? I am trying to figure out where my issue is with the fuel sending unit.
  3. zraffz

    School cop and My pipes experience yesterday

    Haha I re-read this entire thing and got an even better chuckle out of it. I'll admit I've done some stupid things. Usually they happen while I'm in my car (dumping the clutch, brake stands, donuts, etc) late at night. Fastest I have driven on the highway is only 105 (late at night). I rarely...
  4. zraffz

    My 93 RCSB

    That truck is beautiful. I'm a tad bit jealous ;)
  5. zraffz

    setting roller rockers.(mower) lol

    I wanna see a video of it in action!
  6. zraffz

    NOT a GMC400 but to prove a point

    I understand to some extent.. I was once worthless. I regret my hike school days. I was always in the top 15% scoring index on standardized tests across NJ (usually the top 10%) yet I never did better than a D in any of my classes. My guidance counselors had always been baffled by my testing...
  7. zraffz

    1997 K1500 Suburban part out

    I'm sick at the moment. horrible sinus infection is really killing me. I have not bothered to take anything apart or even go outside and work on my truck.
  8. zraffz

    1997 SCSB 1500 (Build in progress)

    Parts are coming in but I'm too sick to do anything. Horrible sinus infection.
  9. zraffz

    GMT400 You can't quit looking at!

    ^^ too true. I was capable of doing a lot at a young age. I'm sure I wasn't the best and I still am nowhere near the best. It's still fun to make a fool out of myself when I'm screwing around in public or at work. It makes the work day go by faster and if one person in public gets a good laugh...
  10. zraffz

    NOT a GMC400 but to prove a point

    Good job man. Mad props.
  11. zraffz

    Steering knuckles?

    Nah I got new ball joints and tie rods since I'm lifting the truck. Already have it all sitting in my kitchen :D
  12. zraffz

    GMT400 You can't quit looking at!

    Yeah and that's about as hard to do as getting aids in africa. I've seen plenty of pullied lawn mowers capable of doing wheelies.
  13. zraffz

    GMT400 You can't quit looking at!

    haha good motto but I am always willing to try something at least once before I decide I suck at it and give up. Here was a picture I just found in between the outlining and shading lol... Now I gotta make an appointment tomorrow to get my right arm done... and than this will be coming...
  14. zraffz

    GMT400 You can't quit looking at!

    It's different. Granted I am not a great welder I still grew up doing a lot of fabrication since I was like 15 or 16. I have never tackled a project of the scale that he claims but I have taken a Yamaha Warrior ATV and cut the frame apart and fit a 1997 CBR 600 F3 motor into it without...
  15. zraffz

    GMT400 You can't quit looking at!

    I agree... How the hell does an 18 year old afford the axles and tires off an excavator? And now factor in the time it would take to design, fabricate and assemble that truck. He is 18 years old. Possible but unlikely. Not to mention it isn't even a GMT400. On another note, a local drunk has a...
  16. zraffz

    tandem blazer, tahoe or suburban?? 6 wheel!

    Yes and 2 grand later in tires alone..
  17. zraffz

    Steering knuckles?

    Yeah screw that. I have a parts truck but I didn't want to go through the hassle. Guess I have no choice. I heated up and used penetrating oil on the bolts that hold the hub to the knuckle and they stripped. The hub is shot and I needed to get it off. The hubs on the parts truck are perfect...
  18. zraffz

    Steering knuckles?

    Or maybe I will and than I don't need to buy new hubs also and I can save quiet a bit of cash... hmmm..
  19. zraffz

    Steering knuckles?

    Does anybody make replacement steering knuckles? I really don't feel like pulling them off the parts truck.
  20. zraffz

    Next mods worth the money? How much hp?

    the only thing that might be worth anything is the pulley... decrease the size or switch to a lighter material. either way you won't see huge power gains. I'd personally not bother but if I did I'd get an aluminum pulley of a normal size. As stated; tune.
  21. zraffz

    Hopefully getting a new truck soon!

    5 grand for 227k? I would never do such a thing. For that price you could own a very nice one or a 2500HD and a 6.0 with comparable miles...
  22. zraffz

    Any way to lift a hitch?

    You didn't read that properly. He said it should mount and sit normally on a truck with a BL.
  23. zraffz

    Any way to lift a hitch?

    If you don't actually use it, cut the old brackets down and remake them.
  24. zraffz

    1997 K1500 Suburban part out

    Not understanding what you are asking. Are you talking about that clip that the boards on the back of the seat latch onto?
  25. zraffz

    1997 K1500 Suburban part out

    Turns out the truck is electric 4wd and the driver pass door switches are off; 4wd buttons and driver/passenger door controls. Their is some wear on the buttons themselves (the images are worn a little bit for the driver's two front windows but the buttons function fine): [$20 + $7 or $15 for...

Latest posts

Members online

Total: 1,130 (members: 46, guests: 1,084)

Forum statistics

Threads
64,818
Messages
1,401,306
Members
52,539
Latest member
Hoosies Man

Share this page

Top