Search results

  1. I

    14 bolt SF disc brake build

    Pics and info PLEASE:hmm:
  2. I

    What the Rotors/Caliper/Pad combo to upgrade the front 2500 8 lug brakes to HD 3500?

    Thanks for the reply, man I really thought someone posted regarding the 8lug. I need to improve the front brakes, I am going to try the NBS master cylinder with my OBS Hydroboost setup. I am going with a slotted rotor and EBC pads, anyone have any other recommendations for the front? I already...
  3. I

    What the Rotors/Caliper/Pad combo to upgrade the front 2500 8 lug brakes to HD 3500?

    Hey guys, I read one of the many OBS brake threads that talks about upgrade my Burb's 4x4 8 lug 8600lb front brakes to the larger caliper found on the 3500's but now of course cant seem to find the thread. I just need the parts list for the year/model of Rotor: Caliper: Pads: I want...
  4. I

    Time for a new Steering Box, should I go AGR superbox 2, Red Head, or reman'ed OE?

    Hey guys, I've rebuilt my front end and there is still slop in the steering, so I'm going to do it right and put a new box in, what should I go with? Also, If anyone has a link to the write up that uses the metal Jeep style steering shaft that replaces the rag joint with U'joints let me...
  5. I

    Binding and slowing effect when I turn or when I reverse...started today HELP!

    Problem sovled! I feel very relieved but also DUMB for overlooking the obvious... I took the diff pan off and drained the fluid, looked clean and smelled fine. No metal parts in the bottom of the pumkin and all gears looked in tact... Since both rear tires were off the ground, I decided to...
  6. I

    Binding and slowing effect when I turn or when I reverse...started today HELP!

    G80? It has the 14 bolt FF and 4L80e transmission Yes to the hydroboost, I'll check that...didn't think about that. Thanks guys, Any input is appreciated :D
  7. I

    Binding and slowing effect when I turn or when I reverse...started today HELP!

    Hey guys, My truck is a 2500 Burb with 7.4l and 80 series tranny and 14bolt FF rear end. My rear brakes have needed to be adjusted for a bit and has caused a pulling effect to the drivers side under hard braking...today that became more noticable when I drove my truck from its parking...
  8. I

    96 Suburban with Hydro Boost needs brake upgrade BAD! please give your input on fix

    sorry for late reply, 265/70 or 75/16 slightly larger than stock....but not by much. for searching purposes, regarding the NBS: 2002 suburban hydroboost master cylinder OBS hydroboost unit OBS unit must be machined to accept the NBS MC...takes slack out of pedal and engages the...
  9. I

    junkyard brake upgrade ideas?

    No guys, the opening in the OBS hydro boost is too small to accept the bore of the NBS master cylinder. So what has to be done is the OBS booster needs to be machined another 1/4" bigger. My question is if anyone knows the best tool for the job? I think I've decided to just buy the OBS...
  10. I

    junkyard brake upgrade ideas?

    anybody use the NBS master cylinder with the OBS hydroboost? I've heard that makes a huge upgrade in pedal feel but the MC is too big for the opening in the OBS booster?
  11. I

    96 Suburban with Hydro Boost needs brake upgrade BAD! please give your input on fix

    Heres a good thread to follow regarding the NBS master cylinder upgrade for the OBS hydroboost. http://www.fullsizechevy.com/forum/general-discussion/technical-maintenance/418811-answer-squishy-obs-brakes-perhaps.html
  12. I

    96 Suburban with Hydro Boost needs brake upgrade BAD! please give your input on fix

    Hey guys, I just got back from a camping trip this weekend and had a near collision occur on the freeway because my brakes wouldn't stop my burb at a reasonable rate. I was driving 65mph and kept a reasonable distance in front of me but it still wasn't enough so I had to jump on the brakes...
  13. I

    what size is the hex shaped drain plug?

    Sorry, it's for the transfer case... Not sure which model. It's a Recessed hex bolt, like an Allen head. I'm going to try a 7/16 or 10mm but Kragen doesn't have it so have to drive to sears
  14. I

    what size is the hex shaped drain plug?

    I have a 96' 2500 burb with 7.4 auto...I tried a 3/8" but its not quite snug and I dont want to strip it
  15. I

    Transfer case stupid question thread

    I have a 96 suburban 4x4 with 7.4l what size is the hex bolt to drain the T-case?
  16. I

    Play in steering

    i know how you feel scharst... earlier this year I had 2 inches of play in the steering and i constantly have to center the steering or it will veer to the right or left lane. I replaced the idle arm, pitman arm, and all tie rods... it helped but only slightly. BTW what is a RAG Joint? and...
  17. I

    The Stupid Lift Questions Thread

    Thanks RCman989!
  18. I

    The Stupid Lift Questions Thread

    I need new shocks, I want the bilsteins, but I plan on doing a 3" body lift next year.... will stock height shocks work with the body lift or do I need to buy the taller shocks when I do the body lift... Or can I just run the longer shocks now... I'm trying to avoid buying shocks again
  19. I

    Help with choosing my Suburbans basic audio upgrades OBS

    thanks baggin... I may go that route to get a little more bass
  20. I

    Help with choosing my Suburbans basic audio upgrades OBS

    Hello guys, I already have a SONY CD Deck: MEX-BT3800U http://www.crutchfield.com/p_158BT3800U/Sony-Xplod-MEX-BT3800U.html?tp=5684&tab=features_and_specs I want to purchase New speakers: Front Door: 6.5 or 6 3/4 " components Rear door: 6.5" 2 ways Rear Roof: 4x10" ---Ive read that...

Latest posts

Members online

Total: 1,232 (members: 18, guests: 1,214)

Forum statistics

Threads
64,464
Messages
1,394,643
Members
51,726
Latest member
ThatOldRedFarmtruck

Share this page

Top