Help with choosing my Suburbans basic audio upgrades OBS

[irishluder]

Hello guys,

I already have a SONY CD Deck: MEX-BT3800U
http://www.crutchfield.com/p_158BT3800U/Sony-Xplod-MEX-BT3800U.html?tp=5684&tab=features_and_specs

I want to purchase New speakers:
Front Door: 6.5 or 6 3/4 " components

Rear door: 6.5" 2 ways

Rear Roof: 4x10" ---Ive read that they are a waste and sometimes not worth spending the money to upgrade.

Here are the speakers I am looking at:
Fronts:
http://www.crutchfield.com/p_113KFCP708/Kenwood-KFC-P708.html?tp=105

Rear door:
http://www.crutchfield.com/p_107DB651S/Polk-Audio-db651s.html

Rear roof:
http://www.crutchfield.com/s_2068KS4100/Kicker-KS4100.html

I plan on using FatMat as my sound deadener
I am going to to use a 4 guage amp kit from Knuconceptz

I'm going to power the components and rear door with one of these amps possibly:
http://www.amazon.com/Kenwood-Kac-8...?s=electronics&ie=UTF8&qid=1293153504&sr=1-35

http://www.amazon.com/Phoenix-Gold-...?s=electronics&ie=UTF8&qid=1293153504&sr=1-42

http://www.amazon.com/Rockford-Fosg...?s=electronics&ie=UTF8&qid=1293153504&sr=1-48

http://www.amazon.com/Infinity-Refe...?s=electronics&ie=UTF8&qid=1293153988&sr=1-17

http://www.sonicelectronix.com/item_17758_MB-Quart-NAU-460.html

http://www.woofersetc.com/p6839/DSC450--MB-Quart-4-Ch-400-Watt-Amplifier.htm

Other than needing help with picking components that work well in my Burb, I need to figure out how to wire the components with the crossovers from the headunit to amp and then to speakers?

thanks

 

[DRAGGIN95]

Only I suggestion here, on both of our burb's I have removed the original 4x10's and then you can remove the plate that bolt's in back there, and then I open up the hole just slightly it really doesn't take much at all, and install 6x9's in place of the old 4x10's, there are so many choice's of 6x9's, and there are only a couple of choices for 4x10's, I had a set of JL Audio Evolutions series in our old burb, sounded great!

 

[gmcyukondriver]

I actually got the Kenwood 4x10's pretty cheap (since no one buys them). I think they were around $100-120, anyways, they're Kenwood KFC-415c. http://www.kenwoodusa.com/Car_Entertainment/Speakers/4''_x_10''_Speakers/KFC-415C

 

[irishluder]

thanks baggin... I may go that route to get a little more bass

 

[SShockwave]

Only I suggestion here, on both of our burb's I have removed the original 4x10's and then you can remove the plate that bolt's in back there, and then I open up the hole just slightly it really doesn't take much at all, and install 6x9's in place of the old 4x10's, there are so many choice's of 6x9's, and there are only a couple of choices for 4x10's, I had a set of JL Audio Evolutions series in our old burb, sounded great!

Any idea if this applies to ext cabs? I'd love to put some 6x9s in place of those 4x6s back there.

 

[DRAGGIN95]

I have not put these in an exy. cab, but I am sure that if you wanted to the opening could be opened up for a 6x9, but it's going to be some work.

 

[Solid94]

i just installed some infinity 2 ways in my girls sierra both front and rear and it sounds killer now