Recent content by kyotey1693

  1. kyotey1693

    Aluminum Vortec Heads?

    Thanks man. I will check them out.
  2. kyotey1693

    Aluminum Vortec Heads?

    That link is some bs that viglink adds automatically. The link I posted in the very first line is still a good one to the heads I'm talking about.Here it is again too. http://www.motorsports.com/sbcaluminumsbchevycylinderheadsvortecrace.aspx I'm not planning to do mpfi. I'd like to run those...
  3. kyotey1693

    Aluminum Vortec Heads?

    Thanks for the link. I have read through that a few times and narrowed it down to the few questions I have above. I realize I will need more than just a set of heads. Still trying to work out a full parts list before I start spending money. Do you know anything about the heads I posted above...
  4. kyotey1693

    Aluminum Vortec Heads?

    Have you guys heard of these heads or this company http://www.motorsports.com/sbcaluminumsbchevycylinderheadsvortecrace.aspx I have an 89 c1500, 5.7 tbi (with all the tbi mods), 5spd, long tubes, full exhaust, crane cams ignition and coil, 1.6 roller rockers, open element air cleaner, etc...
  5. kyotey1693

    Coil Help

    Got it! Thanks man! The system works great now
  6. kyotey1693

    Coil Help

    I think I might have an answer. I found a diagram from a msd box that shows splicing both pink wires together and running to the red coming from the box. ANd splicing both whites together and tying them into the white coming from the box. Coming out the box, orange is power (pink wires) and the...
  7. kyotey1693

    Coil Help

    Hey guys I have a Crane Cams HI-6 box and LK-92 coil sitting in the garage. The only thing keeping me from installing it on the truck is the coil plug adapter harness. It appears that the harness is out of production. I know where it splices into the HI-6 box. Can anyone tell me which wires I...
  8. kyotey1693

    Shift up light

    No love on this issue huh?
  9. kyotey1693

    Shift up light

    I managed to change my moonies out for some needle style gauges with a tach and everything works flawlessly (I was doubtful that it would). My truck was originally a 4.3 w/ a 5 speed but now its a 350 w/ a 5 speed. I got the speedo dialed in to the tire and rear end size (verified w/ gps) and...
  10. kyotey1693

    Tahoe Limited seat wiring

    These are the few write ups I found. http://forums.trailvoy.com/showthread.php?t=51288 http://www.pontiacbonnevilleclub.com/forum/viewtopic.php?p=256986 http://www.gmfullsize.com/forum/showthread.php?t=209476&page=5
  11. kyotey1693

    Sloppy shifter - manual

    Bearcat - Install was a piece of cake. Couldn't have been simpler. Sewlew - Let us know how you like it when you get it installed and pics of course
  12. kyotey1693

    Tahoe Limited seat wiring

    Are you positive about the element being embedded? I read quite a bit on some tahoe forums and most of those guys have actually managed to change the heating pad without even removing the seat wrap, let alone the cushion. I found a really good write up on one of them that had tons of pics. I...
  13. kyotey1693

    Sloppy shifter - manual

    Yep. Mine came with a new one.
  14. kyotey1693

    Sloppy shifter - manual

    You'll love it when you finally get it. Yes I got the short throw. I considered changing the stick but it's hard to know which one to get unless you can actually try it first. Kinda like ordering shoes w/o trying them on. But I'm pretty much used to it now and barely notice it anymore.
  15. kyotey1693

    Brake upgrade failure. Desperate for help!

    New spindles are on their way. Mike at DJM was great to deal with and very helpful. Thanks Mike! And thanks to all of you guys for you help.
See more

Latest posts

Members online

Total: 1,064 (members: 13, guests: 1,051)

Forum statistics

Threads
64,464
Messages
1,394,652
Members
51,727
Latest member
Bams79k20

Share this page

Top