Coil Help

[kyotey1693]

Hey guys I have a Crane Cams HI-6 box and LK-92 coil sitting in the garage. The only thing keeping me from installing it on the truck is the coil plug adapter harness. It appears that the harness is out of production. I know where it splices into the HI-6 box. Can anyone tell me which wires I would combine coming out of the coil harness?

I'm including a pic below of the adapter and how it plugs in. If anyone can help from there I'd appreciate it.

You must be registered for see images attach

 

[kyotey1693]

I think I might have an answer. I found a diagram from a msd box that shows splicing both pink wires together and running to the red coming from the box. ANd splicing both whites together and tying them into the white coming from the box. Coming out the box, orange is power (pink wires) and the black is ground (white wires).

Any thoughts?

You must be registered for see images attach

You must be registered for see images attach

 

[SAATR]

Here on page nine:

http://www.cranecams.com/uploads/instructions/9000-6000c.pdf

 

[kyotey1693]

Got it! Thanks man! The system works great now