Recent content by daddy_dandy
-
D
rear disc swap 8 lug c-clip rear
CrazyHoe and I answered your post on pacificp.com/forum but there's a sticky a few threads up which addresses your question. http://www.gmt400.com/forum/showthread.php?1856-13-quot-NBS-rear-disc-on-14-bolt-SF- daddy_dandy
- Post #2
- Forum: Axles + Brakes
-
D
Battery draining overnight
http://www.pswired.com/misc/pacaudio/syswire.pdf- daddy_dandy
- Post #8
- Forum: Engine Performance + Maintenance
-
D
No power during take off. HELP!!!
I didn't say anything like that ;)- daddy_dandy
- Post #18
- Forum: Engine Performance + Maintenance
-
D
No power during take off. HELP!!!
Aww, come on man. That was funny. I think laughter is the proper response :)- daddy_dandy
- Post #16
- Forum: Engine Performance + Maintenance
-
D
Can't loosen distributor clamp bolt HELP!!!
Worked for me. Then again I've been playing tennis since I was a kid so my forearms and hands are pretty strong.- daddy_dandy
- Post #23
- Forum: Engine Performance + Maintenance
-
D
LQ9 Swap into my 96 C1500?
Yes, definitely install an 80E with the 6.0. Installing the 6.0 moves the engine two inches forward but since the 80E is longer, it's my understanding you won't have to move the transmission mount. 6.0 + 80E + truetrac = FTMFW- daddy_dandy
- Post #10
- Forum: LSX + Carb Swaps
-
D
Can't loosen distributor clamp bolt HELP!!!
Craftsman makes some small wrenches which came in a set of tools I got. They work great for this. They're maybe ~4 inches long.- daddy_dandy
- Post #21
- Forum: Engine Performance + Maintenance
-
D
Ticking/Rattling coming from flywheel?
Had the same noise in a 94 C1500. Turned out the flywheel was split and was occasionally rubbing against the housing cover. Also, if it turns out you need a flywheel, I have one and will send it to ya for $20 + shipping. Never been used but has been on the shelf for a few years now.- daddy_dandy
- Post #6
- Forum: Engine Performance + Maintenance
-
D
No power during take off. HELP!!!
I suggest smoking a bowl. Then the loss of power won't be so noticeable ;) Of course, you may not want to drive while under the influence......- daddy_dandy
- Post #14
- Forum: Engine Performance + Maintenance
-
D
need a question answered...
Enjoy! http://bit.ly/be1qDK- daddy_dandy
- Post #25
- Forum: Engine Performance + Maintenance
-
D
Stock GMT400 Headlight Assemblies
Ok, other guy fell through. Still need some stockers. Thanks guys. Edit: Take that back, I'm good to go.- daddy_dandy
- Post #12
- Forum: Wanted
-
D
Stock GMT400 Headlight Assemblies
I would. Especially if the stockers fit well.- daddy_dandy
- Post #9
- Forum: Wanted
-
D
Weird Voltage Issue
Common problem with these vehicles. The headlights get their power directly from the switch which causes a big load on the system. My suggestion is to get some relays and wire them directly to the battery. Nothing you can really do about the blower. The turn signal jump is a problem with the...- daddy_dandy
- Post #9
- Forum: Audio + Electronics
-
D
annoying squeak!!!! suggestions??? driver's front side
Experiencing the same thing except on the passenger side. I jacked the truck up last weekend and there's about 3/4" of up and down play in the wheel and I can make the upper control arm smack the inner fender wall. Definitely a bushing issue. Instead of taking the truck to a shop (since I...- daddy_dandy
- Post #20
- Forum: Axles + Brakes
-
D
So my A/C is shot!
Rockauto is good to deal with. They only do drop shipping so everything comes from another wholesaler or directly from the manufacturer. 90% of the time they have the best prices and shipping is relatively cheap.- daddy_dandy
- Post #8
- Forum: Engine Performance + Maintenance
