Spyder headlamps.....my take on 'em...and LIGHTING in general

[shovelbill]

You must be registered for see images attach

did you upgrade the back-up bulbs too?

 

[michael hurd]

You must be registered for see images attach

Grote 64HO1-5 800 lumens, voltage agnostic ( 12-36V )

http://www.grote.com/wp-content/uploads/2014/09/64H01-5-GroteSelect-Flood-Lamp.pdf

 

[michael hurd]

did you upgrade the back-up bulbs too?

Drop in LED's with projector lenses.... and 4 x large "Eagle Eye" LED's that mount with a through hole. IIRC, the through holes in the bumper I drilled was around 3/8" or so.

 

[shovelbill]

i set them both on a garbage pail.....at 5'......couldn't go back anymore as i didn't feel like moving my truck.
the surface mount square

You must be registered for see images attach

the longer unit

You must be registered for see images attach

 

[shovelbill]

You must be registered for see images attach

Grote 64HO1-5 800 lumens, voltage agnostic ( 12-36V )

http://www.grote.com/wp-content/uploads/2014/09/64H01-5-GroteSelect-Flood-Lamp.pdf

let there be light! seem to do the job......damn, 2x2 cubes?

 

[michael hurd]

2 13/16 square, with 1 5/8" mounting depth.

The lens is right around 2" square. They tuck under the bumper and are almost dead flat against the trailer hitch, protected from rocks and basically flush with the edge of the bumper.

 

[shovelbill]

i was going to give these a shot in the back up position in the tails

You must be registered for see images attach

 

[shovelbill]

Michael....do you have a photo from next to the driver door or so, to see the pattern behind the truck.....?

 

[michael hurd]

Now, if you want lots of output for low speed driving off road etc, these have a good pattern. Wide, tall beam that will light up the forest from tree line to tree line.

You must be registered for see images attach

 

[michael hurd]

You must be registered for see images attach

Michael....do you have a photo from next to the driver door or so, to see the pattern behind the truck.....?

I will post one in a second, looking backwards from beside and behind the truck, just have to blank out a few plate numbers.