Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
as soon as I can figure out why I cannot get power to the dome, map, reading, door panel and door switch bulbs
Update.....I used their vehicle ID. It brought up the best match for each place in the cab. I highly recommend that one reuse their original sockets in the gauge cluster...SBLED's has a good product but their bases and sockets are just a centimeter or so small. You will get a tighter, more secure feeling with OEM sockets, just plug new bulb in after pulling the incandescent. Having some issues in other places, like the 3mm bulb in the door switch, but so far all is good....The festoon type bulbs recommended for reading lights and dome are a PITA as the bulb terminals and circuit board w/ bulb are just a cm or so to big in this case.... They are great about returns to try the next size down.........I will be switching dome and reading as soon as I can figure out why I cannot get power to the dome, map, reading, door panel and door switch bulbs.......
Here's one. You have to click on the "specifications" to see it.
Not sure if this is what you/we need. There are so many...
https://www.superbrightleds.com/mor...e-wedge-retrofit-car/199/#/tab/Specifications