Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yea my truck is the obs model its a99 yukon and ima get a stepnotch for it wat abt driveshaft issues if I do yhe flip kit ?
If you get the right kit for the truck, there should be no driveshaft issues. The axle saddles should set the pinion angle. A flip kit for an suv should have new front spring hangers that actually provide some "lift". If you were to just straight flip the axle like a pickup, you'd end up up with about 8-9" of drop.
Sent from an obama phone
x2 those look scaryYou may have to do something with that exhaust.
And those slotted bolt holes on the hangers should probably have some washers on 'em. Don't want to take a chance of those bolt heads pulling through the holes.
I'd be putting washers on all those bolts on the hangers, actually.
You may have to do something with that exhaust.
And those slotted bolt holes on the hangers should probably have some washers on 'em. Don't want to take a chance of those bolt heads pulling through the holes.
I'd be putting washers on all those bolts on the hangers, actually.
Wer did yuh get that c notch ?don't knw yet abt getting a step notch ima need a cnotch how much for one ? And any issues wen yuh installed it ?