DISCUSSION THREAD: Alyssa, Horns' 94 Silverado

[Horns]

Ok, need a little bit of info guys. I need to replace both of my front wheel bearings. Since the D44 is going in this summer, and I have access to about 26 GMT400 parts vehicles, I just want to throw some used ones in there. Will any wheel bearing from a K1500 fit my truck? Or are the years different? I realize I don't have ABS and the newer trucks do, but will the hubs of a newer truck still fit? No harm done just cutting the WSS off.

 

[TylerZ281500]

i dont know but id make sure if you use used one they are in useable shape and grease the piss out of them

 

[Horns]

i dont know but id make sure if you use used one they are in useable shape and grease the piss out of them

Obviously...

 

[TylerZ281500]

hey you asked. as for wheel bearing differences last time i was at the parts yard there wasnt any difference i could tell. easy way to find out is go on rockauto and look up part numbers or something

 

[Horns]

Part numbers will be different because of the WSS.

 

[TylerZ281500]

seems like the part numbers are consistant with 9.5 and 8.25 fronts. as far as i can see non wss delco part is still listed under a 98 k1500 just as it is a 93

 

[91Bluestreak]

They are the same minus one having the senor for abs. just like the axle shafts are the same but new ones come with the abs tone ring for simplicity.

 

[Horns]

Gave her some much over-due maintenance today.

You must be registered for see images

 

[Vortec Lover]

about time we had an update!!

don't you just LOOOOOOOOOOOOOVE brine?????

 

[Horns]

As soon as I took the axle nut off the whole hub came apart. Haha.

Hopefully I'll be cutting all that front end stuff off soon.