cjman250
Last Of A Dying Breed
Driver side wheel bearing went out. I drove to San Antonio (60 mile round trip on the interstate doing 70~ mph) and was almost home when I heard it scrap the bearing. Like a mile from home and I kept going and almost ruined the spindle. I had to cut the bearing off with a grinder/cutting wheel. It welded itself to the spindle but I got it off and cleaned it up nicely. Monday I'll call Belltech from work and see about a replacement spindle. If I can buy just one. I got it back together this morning. I had to borrow my Mom's Trailblazer. Truck is all I have to drive.
I have a DJM driver side spindle a friend gave me. Same 2" drop but his is a regular cab and the inner bearing is smaller. I had it installed and all and the damn bearing wouldn't fit, so the rotor would be different. I didn't want to install it but I needed to.. But ended up just removing it and fixing mine. You could really see how much more mass and weight the Belltech had when they were next to one another. I'd never buy anything that's not Belltech.
I was coming back from buying these 07 seats... Which I would of installed if not for the bearing troubles which took my time up instead.
You must be registered for see images attach
I'm going to search here today and see who's installed those seats and how they did it. Some ideas.. I figure I'll end up making some brackets from steel.
Sent from my Nexus 5 using Tapatalk Pro
those are the seats that i want for mine,the console also