Mine was about $50 if I remember right. 180 is way to much imo, I'd only pay that if he was rerouting it to the back of the transmission.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I was hoping you woukd chime in. You have a pic of how yours is routed?Mine was about $50 if I remember right. 180 is way to much imo, I'd only pay that if he was rerouting it to the back of the transmission.
I thought I did but I guess I don't. I've checked everywhere. It basically looked just like the one pictured above though just not mandrel bent.I was hoping you woukd chime in. You have a pic of how yours is routed?
The stock size on a half ton 350 is 2". You will have a pretty serious gap to fill if you buy 3" to do this mod unless you're redoing the whole system with 3"^ Pretty much what I was thinking, although the bends may be a bit more than 6$ each (Summit/Jegs charges $20~ for 3" mandrel stuff); Still a far cry from $180, that's highway robbery.
Yeah..... I'm not sure what I was thinking. For me, the y pipe is 2.5 inches so that's what I would end up using. Maybe I thought 3" because that's what my system is after the y.The stock size on a half ton 350 is 2". You will have a pretty serious gap to fill if you buy 3" to do this mod unless you're redoing the whole system with 3"