Check engine light problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jmc256

Newbie
Joined
Oct 14, 2013
Messages
19
Reaction score
0
I used a set of sparkplug non foulers to trick my 02 sensors, cost about $5.00.

Sent from my HTC One using Tapatalk
 

jmc256

Newbie
Joined
Oct 14, 2013
Messages
19
Reaction score
0
I think I remember it all. Go to an auto parts store and ask them to show you a new o2 sensor for your truck, take it over to the spark plug non foulers, find one that seems like it would thread into. These come in a 2 pack. You will screw one non fouler into the other one. Then take a drill bit or a carbide burr tool and ream out the one you just screwed into the other. It needs to be big enough that your 02 sensor can screw into it. Once it is big enough, screw the non foulers into the o2 sensor hole on the exhaust system, then screw the o2 sensor into the non fouler. It lets the 02 sensor feel the heat, but won't foul out. I have had mine on for over two years and it has not come back on. I will see if I can find the link for pictures.

Sent from my HTC One using Tapatalk
 
Top