1993 K2500 reg cab long bed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JasonG

Newbie
Joined
May 9, 2018
Messages
42
Reaction score
109
Location
Stuart Fl
This is my chevy 93 k2500 regular cab long bed 8600 gvw with a 350 tbi motor, 4l80e trans 241c transfer case, and 4.10 gears front and rear. It was a south carolina forest truck for government so it and "HD". Paint job looks better after clay bar compound polish and waxing it but still need to be painted. It is pealing in some spots and has little dings.
Interior....well the dash is scrwed as usual and pln on converting it all over to black instead of tan.


List of what i have done so far
-Painted grille
-changed chrome bumpers to black
-changed EVERY light bulb to LED inside and out
-msd coil, wire, cap, rotor & new plugs
-bought smoked taillights
-full fluids change
-new radiator
-new injectors and gasket/seal kit with fuel pressue reg and 13-14psi spring for tbi
-tbi mod
-new ball joints, cv axles, tie rods, sway bar end links, pit man and idler arm,
-new discs and pads up front
-added a small air pump on fender well
-140 amp altenator
-dual electric fans
-big ass odessey battery
-bigger battery and altenator wires
- relocated battery to cab behiend the seat
- apline head unit
- neoprene seat cover
-hid headlights with greeb halos

Some things to come
-new dash
-heat and sound insolation
-new carpet
-headliner
-black interior
-new heads old one is cracked
-raptor bed liner
-window tint
Thats to start

You must be registered for see images attach

You must be registered for see images attach
fire extinguisher and neoprene seat cover
You must be registered for see images attach
redoing headliner
You must be registered for see images attach
battery relocation
You must be registered for see images attach
 
Last edited:

JasonG

Newbie
Joined
May 9, 2018
Messages
42
Reaction score
109
Location
Stuart Fl
You must be registered for see images attach
Also currently ripped the interior out prepping for new carpet, heat and sound insolation not sure of what type yet.
You must be registered for see images attach

Also took manifolds of and cut the exhaust completly
You must be registered for see images attach
You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

JasonG

Newbie
Joined
May 9, 2018
Messages
42
Reaction score
109
Location
Stuart Fl
Thanks yall. Due to a job change had to pit it on hold for a little bit but should getting some new parts next month.
 
Top