Search results

  1. S

    blue_92_sierra's bagged ecsb build thread

    Ive done it both ways. My current truck is on the stock fan with no shroud. been that way for a few years without any issues even in the middle of summer in bumper to bumper Los Angeles traffic. I like the e fans better just because it looks better, you dont have to worry about the upper...
  2. S

    88-98 Ekstensive kit.

    Im not going to bash the 2 link. They work, but they dont work right. The KP kit is nice. Remember you get ehat you pay for.
  3. S

    Shorting lower control arms

    Its possible but the design of the arm doesn't make it an easy task to shorten. It would be easier to build narrowed tubular arms or order some from a shop.
  4. S

    upper bag cups

    The 21/2 are a little short but they'll work
  5. S

    Lowered Problem

    Did you install the djm arms correctly?
  6. S

    upper bag cups

    Thanks I figured it was close to 3 inches. I have some 21/2 cups I think I will throw in there tonight just to get a look at things
  7. S

    upper bag cups

    I was just curious what size upper bag cups you guys are using with MMW arms with RE7 bags.
  8. S

    axle shifted toward passenger side after flip install...

    In theory it shouldnt matter. But these type of parts aren't built to precision standards. If a part is off by 1/4" no biggie. It would be hard to notice. Then you add a part for a different company that might be off 1/4" also you're looking at a 1/2" and that's noticeable.
  9. S

    Plastic epoxy/customization.

    Honestly I have no idea. My buddy owns a shop that repairs high end audio and visual equipment and he uses it there. I just ask him to bring some home lol.
  10. S

    pic request: tie rod notching

    I can get you some pictures of what not to do. I just had one roll up that needs redone and made bigger for 24s. I will get on it this week.
  11. S

    Project:

    New owner.......now it needs a body drop!
  12. S

    axle shifted toward passenger side after flip install...

    Sounds like he had mixed and matched parts like djm snd beltech. I could see that happening I guess.
  13. S

    pic request: tie rod notching

    If the frames not cracked they didn't take too much out lol.
  14. S

    axle shifted toward passenger side after flip install...

    Never ran into that problem with a flip kit. Weird. Glad you got it fixed.
  15. S

    4 link with Factory Gas Tank Location

    I bent a tube to go around the diff housing and welded it to the axle tubes. One link from each side of that going to the center of the modified gas tank crossmember. Mounted those ends with a long bolt. 3 link would have worked the same and taken half of the time. This was in about 1999 so you...
  16. S

    axle shifted toward passenger side after flip install...

    is it possible your truck was wrecked in the past and something is tweaked? sent from the c1500 Denali That's what I'm thinking
  17. S

    4 link with Factory Gas Tank Location

    I did one a long time ago and I'm sure that I don't have pictures. I could explain how it was designed. It worked good but was way more trouble than it was worth. 3link is the only way to go in my opinion.
  18. S

    Plastic epoxy/customization.

    I like to use thin abs plastic for that. Cut to fit the area, then with a little heat you can make the abs match the contour. Clean the plastic good then epoxy the piece of abs in. After that a very thin layer of body filler and your done.
  19. S

    billet cupholder

    Bad ass
  20. S

    Billet Armrests

    That's awesome.
  21. S

    Project:

    That truck is bad ass
  22. S

    Nitrogen question

    All you need is a bottle, and regulator. Link it into your tanks and your done. I do recomend that you make sure your compressors have good check valves. Nitrogen is a dry gas so it does not cause problems with anything else.
  23. S

    Dash Upgrade

    I will try to do a step by step of my install. Will be a week or so before I start. I still need to take the doors and glass off of the doner truck and cut off the roof. That way I can get rid of the rest of the truck and have some room to do the swap.
  24. S

    Dash Upgrade

    Damn between getting home when its dark and the ammount of black widows that call the truck home the is the hardest dash I have ever pulled.
  25. S

    tried my had at shortening my driveshaft

    Thats a good way to do it. I have also made a jig using a set of skateboard trucks and wheels so I could roll the driveshaft without it moving. Worked really well.

Latest posts

Members online

... and 9 more.
Total: 1,053 (members: 59, guests: 994)

Forum statistics

Threads
64,740
Messages
1,399,732
Members
52,340
Latest member
OB2586

Share this page

Top