Search results

  1. drifterwanb666

    trying not to scrap it...

    contacted blackbear wednesday, got another PCM friday, threw it in and its now monday. one little hiccup but i think thats more 02 related, throwing new sensors in today. seems like the seccond pcm fixed that odd issue, thanks yall for the help. :boti:
  2. drifterwanb666

    1994 K1500 4L60E to NV3500 swap

    IIRC, the 4l60e and nv3500 transfer cases will not swap out, or so was the case for me. i had blown a nv3500 years ago, but kept it and its case. the 241c on the nv3500 was 27spline, the tcase in my tahoe is a 241c with a 4l60e 30spline.
  3. drifterwanb666

    The Stupid Electronics Questions Thread

    i dont recall ever testing the boards, but check the pigtail from the harness, if you have the voltages at the pigtail then its not wiring, and pretty clear its the board. you can also check the splitter by the spare if you have the 4 prong trailer connector.
  4. drifterwanb666

    trying not to scrap it...

    i do agree with you, its a bandaid on a chopped off limb, i know. i have an engine im trying to get overhauled and bored out and such, but so much money to keep this truck alive i cant spend money on new parts for the replacement. oil pressure good before cam, less good after cam, threw a...
  5. drifterwanb666

    trying not to scrap it...

    Technically it did, i mean i swapped the cam but not the cam bearings, and lost 10psi of oil pressure. And my pump was pretty wore out after i swapped it, it was ran dry a few times it seemed, galled and the gears didnt really mesh well.
  6. drifterwanb666

    Intake swap thought

    I know this thread died about a year ago, but im actually going to buy the same intake, coincidence. I was wondering what injectors you ran? Seems like i bought the exact same one from the pictures. (They didnt change those) via amazon. Also curious how it worked out?
  7. drifterwanb666

    trying not to scrap it...

    sorry for the confusion! haha, yeah retarded, goofy, muffed up, whatever you wanna call it.
  8. drifterwanb666

    trying not to scrap it...

    after some long highway driving, ive come to this; when the truck goes into "sped mode" it only happens when i first start the truck, or after it idles too long, at a stop light, warm up, or if i go into a store to grab a drink and leave it running. now if i drive it enough in sped mode itll...
  9. drifterwanb666

    trying not to scrap it...

    he said hes been able to get into one, just gotta go to chevrolets website, pay some money, and download software and some other beep boopin or something. worth a shot in the dark, but i did look into that jet tuner.
  10. drifterwanb666

    trying not to scrap it...

    there was a thread, i cant remember who posted it, i wanna say l31maxexpress but im not sure, that used an aftermarket intake, ford 6.2 injectors, gave wiring info and all that. very well documented and really sparked my interest. ive found a knockoff of a tunnelram on ebay thatll allow me the...
  11. drifterwanb666

    trying not to scrap it...

    i like that idea, ill check that dongle out. alot easier then keeping a laptop in the truck all the time.
  12. drifterwanb666

    trying not to scrap it...

    ive got a buddy with HP tuners thats willing to look, but i went commercial with the tune just cause, well, theyve done it before. now that i have a baseline from blackbear i can have it tickled, perse. just more time is all i need, and a billion dollars.
  13. drifterwanb666

    trying not to scrap it...

    i will say that after driving it home last night and to work today, it seems to be getting better, ish. still wont idle and still stays at 2000rpm until i full stop and then acts stupid.
  14. drifterwanb666

    trying not to scrap it...

    its the updated unit. standard is the only part i could i could get my hands on, still was almost $500 and funny you say converting cause im already looking to do so, i need it to run in the meantime to make money to buy the stuff to convert,
  15. drifterwanb666

    trying not to scrap it...

    i asked to change the shift profile, delete egr, delete rear 02s, adjust the fuel for the cam, and see if they could disable air bags and adjust for the speedo for my tire size. airbag lights still on and speedo is still 10mph off but the rest seems to be okay,
  16. drifterwanb666

    trying not to scrap it...

    0411 swap it is, cause no one locally wants to even look at the blackbox. i can order one affordably, thanks to the internet. ill have to do some research onnit, find a thread and such.
  17. drifterwanb666

    trying not to scrap it...

    thats my bad, the oe heads were lapped and re sealed, but i put too strong of a valve spring on and broke a stud, so i got a set of remanned from CHI.
  18. drifterwanb666

    trying not to scrap it...

    not 0411 swapped, but i was considering it until i heard of blackbear.
  19. drifterwanb666

    trying not to scrap it...

    they sent me a pcm, im still using old blackbox so id have to keep mailing it i suppose, i dunno if i can datalog on a blackbox...
  20. drifterwanb666

    trying not to scrap it...

    before the top end rebuild i had a lifter going out, and it would stumble real bad off the line, bog down at any throttle to almost a stall and then act fine. was told it was timing chain, so i did the whole top end. when in rome, right?
  21. drifterwanb666

    trying not to scrap it...

    they were supposed to change some trans things. fuel is good, spiders new new. (4th one)
  22. drifterwanb666

    trying not to scrap it...

    ill start off with this. 1996 chevrolet tahoe, 4wd. l31, 4l60e. in my quest of just a better daily driver ive gone too far, by accident or stupidity. im not sure. heres what ive done to the truck; "RV" cam, (dr.bumpstick), new roller lifters, hardened pushrods, roller rockers, new springs...
  23. drifterwanb666

    P1345 code assist. Questions. 1996 GMC K1500

    thank you, so very much. saved and bookmarked just incase i need it,
  24. drifterwanb666

    Removing cats on 98 5.7l

    ive had my cats off for years, no cats sint gonna cause a drone, your muffler choice will. if youre gonna straight pipe it itll just be a little louder, perhaps a light drone with cruise but other then that youre fine as long as noise. also consider where your tailpipe sits and pipe size.
  25. drifterwanb666

    That didn’t last long….

    oh man dont get me started, imma cry thinkin bout the trucks i would of bought back.

Latest posts

Staff online

Members online

Total: 1,106 (members: 16, guests: 1,090)

Forum statistics

Threads
64,448
Messages
1,394,242
Members
51,689
Latest member
DeeSee

Share this page

Top