Search results

  1. V

    LS SWAP IN CALIFORNIA

    Speartech does. They are expensive but I would recommend getting everything from them and it will just work! Especially with Gen 4 or 5 motors where engine trans and pedal computer comparability is critical.
  2. V

    LS SWAP IN CALIFORNIA

    I doubt you'll find any big shops willing to do that. Too much risk that the used parts don't work and leads to comebacks or blowing the customers budget expectations. An e-rod package has a warranty.
  3. V

    LS SWAP IN CALIFORNIA

    Yes, it's possible but it's not easy. You really want full access to your donor vehicle to be able to pull parts off until the swap is done and through the CARB referee. You need to call the carb info line and schedule an appointment with a ref, you can also request a call back and one will...
  4. V

    RCSB L83 6L90 Swap

    20210125_131608 (2) by VAMTuning posted Jan 25, 2021 at 1:50 PM 20210125_131545 (2) by VAMTuning posted Jan 25, 2021 at 1:50 PM 20210125_131538 (2) by VAMTuning posted Jan 25, 2021 at 1:50 PM Well it's drivable. The suspension surprisingly quiet and smooth but I need to work on the rear shock...
  5. V

    RCSB L83 6L90 Swap

    Orange, I think it was a county service truck at some point. One or two before me sprayed the outside with herculiner.
  6. V

    RCSB L83 6L90 Swap

    Try now? Had to make the album public, sorry guys.
  7. V

    RCSB L83 6L90 Swap

    Really wish these would have worked but they hit the steering shaft. Even switching to the Jeep XJ shaft didn't help. They are gorgeous! 20201203_102750 by VAMTuning posted Dec 8, 2020 at 7:00 PM This was not fun to pull but came off in one big chunk. In the end this was an easy way to get...
  8. V

    RCSB L83 6L90 Swap

    Engine is in. I had to replace the motor mount rubber with some energy suspension inserts so the mounts wouldn't sag. Then came trying to find exhaust manifolds. I tried LT4 manifolds, then some Hooker Blackheart headers for the 2014-2016 trucks and finally some Hooker LS3 style manifolds...
  9. V

    5 x 4.75 Swap?

    I need to get my motor swap done then let my wallet recover for a while before I decide what I'm doing with wheels. I'd still like to go vette IRS and I have the 1" rotors so I might just swap to Camaro rotors so I can run the same front and rear wheels. Or if I do a 4/6 drop and notch the...
  10. V

    RCSB L83 6L90 Swap

    I picked up this ugly duckling the other day...great body except someone sprayed it with canned bedliner. 20201119_082516 (2) by VAMTuning posted Nov 22, 2020 at 8:16 PM The original 5.0 had a bad rod knock so my buddy Tim and I yanked it and the 700R4 out. 60 minutes later and it was gone...
  11. V

    5.3 in a 95 z71 questions

    You may be able to use your 4l60e, but will take some wiring creativity since the pinouts at the transmission are different, I believe. If you go with an X max it might be able to control the transmission, check to see if your year is supported and make sure the cable pinout and the trans...
  12. V

    Gen IV 6.2 2008 L92 with only 7 miles into 95 Diesel 4x4 info and a couple questions

    Sorry, and to answer your question, yes it is possible to turn off everything in the E38 related to the transmission. Whoever unlocks it and removes VATS can do that. PM me if you can't find anyone, I do unlocks with HPtuners.
  13. V

    Gen IV 6.2 2008 L92 with only 7 miles into 95 Diesel 4x4 info and a couple questions

    If it's a 4l80e and you are good with wiring there is a way to make the E38 work with that transmission. You need to find a T42 transmission controller from a 2007 and up truck or SUV that had a 4L60 or 4l80 in it and about a foot of the wiring harness attached to it. If you can get the whole...
  14. V

    1994 2door Yukon carbureted ls swap need some help

    What @OutlawDrifter said, will be easier to make it a dumb non automatic 4-speed with a manual valve body, but there are controller kits out there to use. A Google search for "4l80e stand alone controller" showed options by USShift.com, painless or even a way to hack the GM 0411 computer...
  15. V

    brake rotor swap??

    How were you planning to do the rear axle. I'm looking for options to go to 5x4.75. thanks
  16. V

    5 x 4.75 Swap?

    I'm curious to see where this goes. Have you looked at using a later LT1 camaro axle with disc brakes or more trouble than it's worth to remove all the brackets...maybe see if the inner axles are the same length? I just bought a 1991 RCSB and the plan down the road is to put C4 IRS in it so...

Latest posts

Staff online

Members online

Total: 1,118 (members: 20, guests: 1,098)

Forum statistics

Threads
64,487
Messages
1,395,031
Members
51,791
Latest member
WrenchAndRatchet

Share this page

Top