Search results
-
J
Factory GM cablight LED inserts
And what is the current price? $50 a set shipped to US -
J
weatherstripping
And how do you install the weatherstripping around the doors?- jrsavoie
- Post #2
- Forum: Paint / Body / Detailing
-
J
Where can I find good detailed instructions on how to change the door on the Tahoe?
Thanks Any recommendations on special tools and what kind of weatherstripping glue to use? Is there glue involved in this swap? I am going to build a door installer jack adapter. Like this: http://www.amazon.com/gp/product/B000GBLZCU?psc=1&redirect=true&ref_=ox_sc_act_title_8&smid=A3EPRARSC3P2QP- jrsavoie
- Post #5
- Forum: OEM and Custom Interiors
-
J
1996 GAS K1500 Brake problem We changed pads and shoes. We never disconnected anythi
We used a C clamp with the reservoir open. Turned out we did not have the system properly bled. Never had that problem before. A tube ran from the bleeder into a can of brake fluid was the fix- jrsavoie
- Post #4
- Forum: Axles + Brakes
-
J
Where can I find good detailed instructions on how to change the door on the Tahoe?
Thanks To me the pins are the easy part. Its the regulator, ther weatherstripping and everything else that loses me.- jrsavoie
- Post #3
- Forum: OEM and Custom Interiors
-
J
Where can I find good detailed instructions on how to change the door on the Tahoe?
Where can I find good detailed instructions on how to change the driver's door on the 1995 Tahoe? I found a pair of green front doors for the 1995 Tahoe. The seller had stripped everything off the doors, so I have to put everything back. If he hadn't felt the need to completely strip the...- jrsavoie
- Thread
- Replies: 4
- Forum: OEM and Custom Interiors
-
J
Door Handle and Door Pin Replacement
Is there a good thread or YouTube video on changing the doors out completely I bought a pair of front doors for the 1995 2 door Tahoe that were completely stripped down. Now I have to re-install everything. Regulators, rubber stripping, handles, everything I've never messed with doors before...- jrsavoie
- Post #82
- Forum: Paint / Body / Detailing
-
J
Bolt, nut storage
For standard bolts, I made a bolt bin out of quart cans - tomato juice and similar. I have a row for 1/4" through 3/4" coarse and 2 extra rows for misc.. Nuts, flats, locks and bolts in 1/4" or 1/2" increments. Starting at 1/2" and going to 5" on the smaller diameters The rack to hold the...- jrsavoie
- Post #17
- Forum: The Garage
-
J
I am looking for a pair of 1995 or newer rust free green over gold front doors for a
I am looking for a pair of 1995 or newer rust free green over gold front doors for a 1995 Tahoe. With electric windows and locks Truck, Suburban, Tahoe or Yukon doors will work. I have a pair of solid green doors to trade. If I do not find a pair of green top, gold bottom doors I will... -
J
42 gallon Fuel tank, rock guard and plastic cover from a rolled 1999 K1500 Diesel Sub
42 gallon Fuel tank, rock guard and plastic cover from a rolled 1999 K1500 Diesel Suburban. I also have the cross members available. Near Clifton, Illinois $45 eight 1 five 6 nine four two 5 eight 8 or message. No texts to this land line. Message me. As of today the phone number is still... -
J
2 OEM running boards off a 1998 4 door Tahoes
For sale 2 OEM running boards off a 1998 4 door Tahoe Yukon Very good condition I am open to offers. Will take anything in trade that I can use - $60 eight 1 five 6 nine four two 5 eight 8 or message me. No texts at this land line number - Message me - the number is in vacation mode until I... -
J
HD Ground Strap Kit by Mean Green/VH Coachworks
Not saying anything bad. Just the facts - online money order requests have a scam reputation. I got burnt once. With Paypal you have some protection. Sending a money order is no better than sending cash - Once it's gone, it's gone. Setting up a Paypal account or some other protected payment... -
J
I am looking for a floor jack handle I have an older floor jack that is missing the h
I am looking for a floor jack handle I have an older floor jack that is missing the handle. I could make a handle out of some 1 1/4" O.D. tubing but I need the piece with square hole to slide over the part that tightens and releases the jack. The square stub measures about 7/16. A 3/8 square... -
J
1996 GAS K1500 Brake problem We changed pads and shoes. We never disconnected anythi
1996 GAS K1500 Brake problem We changed pads and shoes. We never disconnected anything. When we put everything back together we lost pedal when we started the truck. We have pedal with the Suburban NOT running. As soon as we start the truck we lose the brake pedal. It acts like air...- jrsavoie
- Thread
- Replies: 3
- Forum: Axles + Brakes
-
J
88-98 Heavy Duty Headlight Harness Kit (NEW)
One of the issues I had with the kit were the short ground wires. I do the Allen screw/battery bolt upgrade and generally run my accessory grounds back directly to the battery. I didn't really see the need for 2 ground wires. They were very short to work with. I made a mounting plate for all... -
J
88-98 Heavy Duty Headlight Harness Kit (NEW)
If he isn't going to sell the kit, then he should sell the plugs and schematic, so we can make our own. It's really not all that hard to figure out. You're only talking 3 relays. Not near as complicated as doing the dual lift pump relay upgrade where you are grabbing wires from all over. my... -
J
88-98 Heavy Duty Headlight Harness Kit (NEW)
Still wondering. Or can I order the plugs and a schematic? -
J
radio knobs
I always need some LOL If You are going to throw them away I will take them. If anybody else needs them, hook them up first, I just bought enough from rockauto to replace what I was missing for now. I'm sure it won't be long before I have to buy more. I'm going to start epoxying the knobs on -
J
88-98 Heavy Duty Headlight Harness Kit (NEW)
Would it be possible to get a harness made with mountable relay sockets instead of mounted relays? And longer ground wires? These were the only issues I had with my first harness. -
J
The oil thread.
I've been using Amsoil oil since the early 90's Amsoil, Mobile 1 or Baldwin filters.- jrsavoie
- Post #56
- Forum: Engine Performance + Maintenance
-
J
Grease lubrication location on a 4th gen C/K
One is up under the front splash guard on the passenger side. You have to remove the splash guard to get to it. Unless you install a MOOG problem solver - then you can access it behind the passenger wheel- jrsavoie
- Post #6
- Forum: Paint / Body / Detailing
-
J
88-98 Heavy Duty Headlight Harness Kit (NEW)
I received my harness a long time ago. The first thing I noticed that I did not like was that the relays mount instead of the relay sockets. I prefer to have the mountable relay sockets to enable easy changing of the relays if necessary. Something I would change if I made my own. Are there...
