Search results

  1. B

    Amp Mounting Ideas

    I pulled the carpet off the back wall Below the window and sanded a few spots down and used PLX glue to glue a piece of wood there. I put the carpet back over it and mounted amps to it.
  2. B

    Distributor play

    Well I was getting misfire on #8 then I changed the cap and button then the misfire moved to #3 so I messed with it again and now I keep getting a misfire on #1
  3. B

    Distributor play

    Well after making this video yesterday I put it back together and it ran awesome so i drove it across town turned the engine off for about 10 minutes and it started up fine again. I drove and got food and it was still running good but this morning I started it and it ran like crap and is missing...
  4. B

    Distributor play

    I have a 97 k1500 and I have replaced just about everything I can think of but I get random misfiring on different cylinders. I had a misfire on #8 then replaced the cap and button then a week later started missing on #3 so I drove it around for a few weeks and Saturday I messed with the button...
  5. B

    Back wheels locking up

    Does this in reverse too, it shifts fine and engine is running good also.
  6. B

    Back wheels locking up

    OK guys I have a 97 k1500 5.0 extended cab and if I pull out of my driveway and turn the wheels sharp the back tires like lock up and don't wanna turn. If I'm going in a straight line it's fine till I I make a sharp turn. It's like they skip if I'm completely stopped but if I give it enough gas...
  7. B

    96-98 Vortec Alternator Upgrade AD244

    I have a DC engineering 320amp alt on my truck and group 31 battery under her hood. I have a pretty big stereo in the truck so I need it and it holds up well under load. With around 3400watts I don't drop voltage below 14.1v ever lol
  8. B

    305 motor questions

    This is my 97 k1500 5.0 and I was looking into running a dual exhaust system on the truck but it's hard to find the bolt stuff because the motor is rare in the trucks? I've heard the 5.7 350 exhaust will bolt right up to it but I'm not sure and it's a lot easier to get certain things for the 5.7...
  9. B

    Running like crap

    Yes it does
  10. B

    Running like crap

    Yea direct swap and its running fine lol
  11. B

    Running like crap

    Just swapped back out for the old distributor and no check engine light?
  12. B

    Running like crap

    I reset the PCM by leaving the battery disconnected for a little over a hr. I was thinking about checking out the map first to see if it's seated correctly
  13. B

    Running like crap

    No the coil was stock
  14. B

    Running like crap

    I'm just going to put the stock map back in reset the PCM and see which sensor is causing it
  15. B

    Running like crap

    I put new oem plugs, expensive plug wires, MSD distributor, ignition coil. I have a new fuel filter and pump and had them check the fuel pressure also the other day.
  16. B

    Running like crap

    Well when I was going down the highway and let off the gas the truck would begin to studder but I give it gas and it would go away or if I used cruise control and went down a hill it would do it also and check engine light would come on and say random misfire on multiple cylinders. I replaced...
  17. B

    Running like crap

    OK guys I have a 97 k1500 305 and I replaced the TPS and map sensors yesterday and my truck is running really rough. Could replacing them throw off the timing? I need help cause I'm already dumped way too much $ in this truck to get it running correctly and can't. Thank you.
  18. B

    Shaking

    I don't know what other things it could be. Has new plugs, wires distributor, rotor button and Pcv. The last thing I want to do is injectors because I'll have to have a shop do them. I don't trust myself to do that job.
  19. B

    Shaking

    I've been running sea foam through it for the past 3 fill ups and it really hasn't made a difference.
  20. B

    Shaking

    At highway speeds if I let off the gas a little it does the shaking thing.
  21. B

    Shaking

    I have a 97 k1500 5.0, I have changed the plugs, wires, coil, fuel filter, Pcv and put on a cold air intake. My problem is when I'm driving at highway speeds and I let off the gas the truck wants to shake and not go. The check engine light comes on for a few days and then goes off. Sometimes...

Latest posts

Members online

Total: 653 (members: 23, guests: 630)

Forum statistics

Threads
64,706
Messages
1,399,187
Members
52,279
Latest member
Crossingover89

Share this page

Top