Search results

  1. S

    1995 5.7 TBI Hesitation

    After a year of battling with this Edelbrock setup, we had decided to remove it and return the truck to stock. We were hesitant to do so because the truck has been restored and built for a Marine and Edelbrock helped sponsor the process. This post was literally a last ditch effort as Edelbrock...
  2. S

    1995 5.7 TBI Hesitation

    Hello, I have searched and have not found anyone who has experienced this issue after installing heads, cam and intake manifold. Specs: 5.7 TBI Edelbrock performance package (heads, mild cam, high rise intake manifold, chip to richen fuel system) Everything else is stock except for new cat and...
  3. S

    Rough Country 4" Spindles and Driveline Question

    I didn't even think it was possible to drop the carrier bearing. Great idea! These are 35x12.5s on 17x9s. Let me know if you come up with a picture. Thanks!
  4. S

    Rough Country 4" Spindles and Driveline Question

    I have attached a few more pictures. The bed is being prepped for paint but it sits level when it is on. Thanks for the help!
  5. S

    Rough Country 4" Spindles and Driveline Question

    Hello. I have a 95 2wd extended cab and installed the rough country 4 inch spindles. The springs in the truck were already longer than stock from the previous owner so the total lift is now about 6 inches. I put in 4 inch blocks in the rear and it is leveled out. The yoke attached to the...
  6. S

    Crazy acting 98 Z71

    Sorry, it's "1992 gmc odd behavior" on YouTube. I deal with a 95 and a 92 and I get them mixed up.
  7. S

    Crazy acting 98 Z71

    I had the same problem and put a lot of money into replacing things. My speedometer would jump and shifting would be crazy. It worsened and it started backfiring and missing, running hot and stalling out. Sometimes it would run fine. I replaced the distributor twice, burned through 3 coils...
Top