Recent content by PWC Repair

  1. PWC Repair

    Best way to add power to my 98 gmc sierra k1500 with 4.3 vortec

    Here's an article.....https://www.motortrend.com/how-to/hrdp-0705-pitstop-chevrolet-v6-performance/
  2. PWC Repair

    90 truck with 86-87 Corvette engine

    So......better torque, overall better efficiency, equal length intake runners, port injection, are all somehow NOT worth upgrading to? So, I guess the LS engines also are NOT worth upgrading to since they have all those things and then some?? I'm so confused right now.
  3. PWC Repair

    90 truck with 86-87 Corvette engine

    It would be a shame not to update to the TPI if you have everything.
  4. PWC Repair

    How much paint?

    I agree. I've painted a little and that sounds about right. Keep in mind, your FIRST coat should be a light (tack) coat.....NOT your last. The others will be medium wet to wet depending upon your finesse with the gun and lighting. Not great lighting + wet coats = RUNS!!!
  5. PWC Repair

    "Factory turbo setup for SBC"

    That setup is all about the cool factor on an old ratrod. I have an old Rayjay off a dumptruck around here somewhere. If a person wants it to actually run decent and make more power there are a multitude of better options available.
  6. PWC Repair

    Does anyone’s workbench . . .

    What......is that even a real question? Any real working man has a bench that looks like that. I see the prerequisite cardboard painting surface as well!
  7. PWC Repair

    Battery, decaled LOL

    That battery instantly has 25% more cranking power LOL!
  8. PWC Repair

    I'm considering doing a 10 % a$$ job.

    Only been inside the Xterra/Frontier/pathfinder/300z type.....BUT they are real nice cause they come apart in sort of modular sections. Just a real well designed unit.
  9. PWC Repair

    I'm considering doing a 10 % a$$ job.

    I don't have a horse in this race but I have rebuilt several ford, chevy, and Nissan transmissions. I just wanted to say THANKS for supporting the site and offering your knowledge on this subject. So great to have a shoulder to lean on when us diy'ers run into a snag!
  10. PWC Repair

    93 Yukon Lugs trying to go from 4th gear lockup to 3rd

    Looked good with no dead spots.....check that off the list.
  11. PWC Repair

    93 Yukon Lugs trying to go from 4th gear lockup to 3rd

    Watch TPS voltage as you move the throttle very slowly. Make sure it didn't develop a dead spot.
  12. PWC Repair

    Stumbles on startup unless I give it gas

    The IAC motor controls the idle. On older engines they simply get dirty and don't work properly. Unscrew it and clean the pintle (tip) and passages. Easy peasy.
  13. PWC Repair

    What should I get?

    Any of them in the "90's" range will be fine. You're talking about towing light not a 7000 pound camper. Look for something clean, well maintained, original and spend the money there, or find something with rebuilt mechanicals and spend money fixing the cosmetics. The TBI 305 will get better...
  14. PWC Repair

    Neal U Pull & Save - Peoria, IL

    Thank you for the mindset to 'save' the door panels by placing them out of the weather. I too am known to randomly place good parts inside vehicles when i find that some a$$hat clown just threw them out on the ground. Some folks really do seem to have $h1t for brains.
  15. PWC Repair

    Freshly rebuilt 4l60e granaded.

    And this.......is why I've learned to do everything myself.
See more

Latest posts

Members online

Total: 985 (members: 13, guests: 972)

Forum statistics

Threads
64,352
Messages
1,391,935
Members
51,472
Latest member
Jake rogers

Share this page

Top