Recent content by nicksuspect

  1. nicksuspect

    Caliper Hitting

    I believe there rebuilt. The last caliper I got also has issues the piston was getting stuck. When I compared to my passenger side caliper they are not the same. One is stamped with numbers and the driver side has no markings what so ever.
  2. nicksuspect

    Caliper Hitting

    I'm going to try this
  3. nicksuspect

    Caliper Hitting

    I thought the same thing so I took the caliper off to inspect the knuckle and there no visible cracks or bends
  4. nicksuspect

    Caliper Hitting

    Yes they are double check last night
  5. nicksuspect

    Caliper Hitting

    Everything is original no mods. I took it apart last night and it fits snug so idk how it's moving back and forth and I didn't see any cracks on the knuckle itself
  6. nicksuspect

    Caliper Hitting

    They was already painted when I bought then. I did sand the area where it should slide back and forth from but I did it on both sides and this is only happening on the drivers. An the noise was still present before I changed the caliper or did any sanding
  7. nicksuspect

    Caliper Hitting

    Hello guys. I'm kinda having a weird issue with my caliper don't know if any of you have ran into this issue. Got a 97 gmc yukon. My drivers caliper is smacking on the bracket it's held onto and causing a loud clunk. You can see in the video it's smacking up and down
  8. nicksuspect

    Ball Joints Brands

    No I'm not replacing them frequently buy it damn sure feels like it. Not like I could say they lasted me 2 years. Just feels so recent that it's frustrating. Than again I've dealt with problems like that with other parts. I'm just trying to fix everything the previous owner didnt
  9. nicksuspect

    Ball Joints Brands

    They are made by the same manufacturer only difference like I said is precision is always available and are identical to mevotech. See I can't do that be waiting 2 or 3 days this is my only car and need it to get to work. So for me specifically I need the parts asap. Just answer me this if you...
  10. nicksuspect

    Ball Joints Brands

    Well when I did all my suspension I did it all together. And nothing was loose. Did tightened the controll arm bolts while It was on its own weight just like you said. And parts still failed prematurely. So even doing it right if the parts aren't made good will fail..
  11. nicksuspect

    Ball Joints Brands

    You would think original equipment wouldnt be considered cheap right.
  12. nicksuspect

    Ball Joints Brands

    I didnt say precision or mevotech fail. I said ac delco and moog do. Precision is less of a hassle to warranty that's why and seem less cheaply made. My moog ones I can't get warrantied because no one ever has them. Usually when I'm swapped parts I need then now not later. The thing with...
  13. nicksuspect

    Ball Joints Brands

    That may be true but just look at them. They are indeed the same.. and the reason I went down this rabit hole is because I've been using ac delco and moog for everything but I've noticed they haven't been lasting long at all. I used moog bushing for both my upper and lower control arms and after...
  14. nicksuspect

    Ball Joints Brands

    That mevotech one you put a picture of is literally this one These lower ones are also the same. All I did was google it. There all manufacturer by the same company. This is why they also look identical to the tee.
  15. nicksuspect

    Ball Joints Brands

    Hello fellow readers. I was writing this topic because I'm not sure if everyone knows this info. So upon looking for balljoints and sway bar bushings. I ended up finding out that moog is made by precision chassis which is sold by oreillyauto. And upon doing more research they also make mevotech...
See more

Latest posts

Members online

... and 20 more.
Total: 1,881 (members: 70, guests: 1,811)

Forum statistics

Threads
64,390
Messages
1,392,823
Members
51,550
Latest member
luismedina

Share this page

Top