mdnky's latest activity
-
mdnky replied to the thread 97 K1500 DD/Overlander.04.13.2024 Great weather today... I hooked up the plasma cutter to the 50A/240V outlet in the kitchen island, usually used by the... -
-
"good option" "rough country" pick 1.
-
no title no deal imho wound never buy any thing with out one
-
mdnky replied to the thread 97 K1500 DD/Overlander.04.06.2024 Hammered a 13mm impact socket onto the cab mount bolt, then gave it a turn with the breaker bar. As expected, it barely...
-
-
mdnky replied to the thread Tires feel like balloons.Generally, the 275/60-15s are XL rated tires, usually put on Vans and large cars...so it's probably not a load rating issue. Those...
-
Hello GoToGuy, Elsewhere I mentioned that a buddy has developed a serious thing for these older Chevy trucks. He's been showering my...
-
Still waiting for a good price on a 96-99 vortec Whipple, but the TBIs keep coming up...
-
Cab mounts on the end of the cab corners or the bed, frame and/or cab have rusted through and are collapsed. Most likely it’s...
-
mdnky replied to the thread Upper Shock Mount Dilemma.Ran across your post while searching for a solution on mine to eliminate the bar pins. Same search turned up these bolt-on brackets...
-
mdnky replied to the thread 97 K1500 DD/Overlander.Living in southern Louisiana, I definitely could justify a whole house system plus a small portable (2k-3k inverter) for trips, but...
-
Don't forget that you'll also need to buy a second gas bottle for your welder for straight argon. Oof, probably because you're buying...
-
Personally given the same type of situation with work to do at my acreage that doesn’t have the power hooked up yet I spend $1200 on a...
-
Great progress I appreciate the attention to detail in something that will never be a show truck. Doing it right for the right reasons I...
-
mdnky replied to the thread 97 K1500 DD/Overlander.04.01.2024 Pulled the bed...again. Went relatively smoothly, considering I did it by myself. Only real issue was one of the fuel filler...
-
-
That's quite possible, but I really only paid $3,500 for it since I sold the plow for $1,000. My budget is $10,000 and anything I found...
