Jason Warrum's latest activity
-
JJason Warrum replied to the thread High idle, goes higher when brake is pushed.Intake gaskets areas specifically? Between throttle body/intake manifold? Other places to check? Thank you
-
JJason Warrum reacted to movietvet's post in the thread High idle, goes higher when brake is pushed with
Like.
If you have a hand pump squirt bottle, like you squirt of plants in the home, fill with water and after the engine is warm and is... -
JJason Warrum replied to the thread High idle, goes higher when brake is pushed.Well That makes sense. So I Just purchased and just goin through it tryn to fix any issues. I know my BIL supposedly went through the...
-
JJason Warrum reacted to movietvet's post in the thread High idle, goes higher when brake is pushed with Like.
Sounds like two problems. The mechanical brakes may be out of adjustment at the rear or calipers not self adjusting close to rotor or...
-
JJason Warrum reacted to Erik the Awful's post in the thread High idle, goes higher when brake is pushed with Like.
Pinch off the vacuum hose to the booster with a pair of vise grips and see if the problem changes.
-
JJason Warrum replied to the thread High idle, goes higher when brake is pushed.Thanks bud. That will be the first thing I try when I get home. Idk if this helps but before all this started my brake...
-
JOk guys and gals…. Need a little bit of direction. 92 Yukon 5.7 Pretty sure it’s a vacuum issue. High idle when starts...
-
JOk guys and gals. 94 c1500. Went out to start up this morning before work, started up fine, no dash gauge lights and no tail...
-
JCheck with the manufacturer or maybe they come with it.
-
JJason Warrum replied to the thread Auto starter.That’s good to know. I guess I should check if I’m gna need new bolts forbthis high torque starter I am putting in. Power master...
-
JNo your stock bolts are for your original starter. Assuming you have the old 10mt starter a new pmgr mini starter uses different bolts...
-
JJason Warrum replied to the thread Auto starter.Ok. Thanks for clarifying. Makes sense.
-
JMaybe bolts are too long for a mini.
-
JJason Warrum replied to the thread Auto starter.Wouldn’t stock bolts be the proper bolts? I have heard of having to shim but in my limited experience changing starters, the...
-
JWith the proper bolts.
Staff online
-
df2x44L60E Destroyer
Members online
- LTrUS
- yevgenievich
- South VA
- Bachert24
- Soogazzi
- Idiom
- shamusshanahan
- skiderjr
- Lowsport14
- Rmannon
- df2x4
- jman2
- jeremy99
- BonestockK1500
- tim46800
- cagee2000
- QLONA
- Dave69
- Peavey
- bigdaddydupree
- jus10inbrla
- Drunkcanuk
- bpbrown
- AK49BWL
- Stumpy
- tybcr783
- AbelTwo
- 98redrocket
- GeorgiaMtnClimber
- caminonut
- Blue69Bird
- Elwood_Blues
- Carlaisle
- bingobobby
- Charlesteneows
- Cazimiro
- NuDeliTY