Recent content by Ehall8702

  1. Ehall8702

    random truck memes

    I was given a 96 f250 with a 7.3l with only 43k on it, just stuck about 800 in exhaust and turbo parts, had an old school ts6 tuner, gonna see what it takes to break stuff now
  2. Ehall8702

    Dual Battery Question

    I have had great experiences woth agm...one thing ive learned is to NEVER mix agm and flooded battery as agm voltage rests higher and the flooded battery will pull voltage from agm...basically the two batteries try and hold level between the two. And ALWAYS use an isolator betweent two batteries...
  3. Ehall8702

    High-End Vehicle CD Receivers Going Away?

    Unfortunantly cd players r a thing of the past, kids now dont even know what a cd is half the time. And gor the love of god, dont get an android unit! SQ is non exiatant, even inthe expensive ones. Take the time to rip ur vds on pc to Flac files ( lossless) and then put on a thumb drive and...
  4. Ehall8702

    Engine/Alternator Whine Issue!

    Go old school, wrap copper wire around outside of rca jacks on back of headunit (the ground part , not the center pin) and ground the other end of that wire to chassis of head unit. It could be alt issue but chances are its just old equipment . Possibly cheap rca cables but im 98 percent...
  5. Ehall8702

    Anti-Seize or Nah?

    There ya go one handed with camera in other on corroded in 2012 OG bearing in cobalt . If antisneeze works for u, that's awesome, everytime I get something in the shop with it, 4 out 5 times it hinders not helps tho. Just was trying to help others with my personal experiences . We have one of...
  6. Ehall8702

    Anti-Seize or Nah?

    It wasn't a test , just didn't think to video the first side that had been in there for year and a half. Nd just about every bearing in a gmt 400 is original till like 250k miles lol and u get to beat em out , I'm too good at it, usually 6-8 blows with my 32oz snap on dead blow. Sometimes it...
  7. Ehall8702

    Anti-Seize or Nah?

    Was replacing knuckles today and thought about this thread. Didn't video first side bearing in there 18months or so , single light tap and it fell out , fat fingered the camera and stopped video after I pulled the knuckle bolts , but no editing to make it look easy, it just fell out. Hope this...
  8. Ehall8702

    Anti-Seize or Nah?

    We have had a 5 gallon of grease that was for the hitch plate on a semi , that stuff works awesome too
  9. Ehall8702

    Anti-Seize or Nah?

    That's only anti seize I use, only on spark plugs and oxygen sensors
  10. Ehall8702

    Anti-Seize or Nah?

    I deal with it everyday, been doing this professionally for last 15 years. Wash that garbage off and use a thick grease instead, less mess and actually comes apart when u need it too. Everyone uses that aluminum anti size and when it dries it's worse than a weld. Pull a hub bearing out once that...
  11. Ehall8702

    Electric fans suck!

    I had two 16" 9n my 97 with stock rad, it did well pulling my camper. We don't get real hot here but it was a tad higher than the stock fan temps. Never overheated tho, if I'd have made a shroud with only holes for fans prolly woulda been better. I pulled it and put stock fan back.
  12. Ehall8702

    Anti-Seize or Nah?

    Ufff, I DESPISE antiseize!!!! Don't matter which metals once it dries up a little bit actually almost welds stuff together! U guys in southern states prolly don't have any issues with it but up north, it makes things worse. We use basic ass chassis grease , it's nuetral so doesn't conduct and is...
  13. Ehall8702

    Bought a CC Dually 454 Whipple

    I've had a few bulbs go bad early but usually 1 out of 20 I've put in but qc isn't worth a crap anymore and I'm sure they sub em out . Still when a set of 4 cost less than a single halogen bulb I keep em in stock lol
  14. Ehall8702

    LS……4.8 or 5.3????

    Yummy....do urself a favor and go to gen 4 knock sensors , they make a harness, and drill and tap holes on two square blocks molded onto the block by oil pan. Nd like said earlier, a Vette fuel filter will make it work with a return fuel system. I just tried a gen 3 to a gen4 6l for my 09...
  15. Ehall8702

    Big Three Upgrade

    I used dual runs ( two for posotive and two for negative) of 3/0 welding cable , 8 agm cells, dual 300a alts , thats feeding about 8500 watts rms. Well was in my 97, gettimg ready to drop everything into my 09 now. I lile welding cable bc i run the wire inside the frame rail under the truck bc...
See more

Latest posts

Members online

Total: 1,205 (members: 45, guests: 1,160)

Forum statistics

Threads
64,352
Messages
1,391,944
Members
51,472
Latest member
Jake rogers

Share this page

Top