Whos running an LSx With T56??

[Glocklimited9]

Hey guys, ive seen lots of swaps on this page, but not alot of 6 speed info

Im swapping an 05 5.3 and t56 into my 97 c1500 4.3/5spd, just wanted to see what mounts and headers everybody is going with

 

[Aloicious]

the LSx T56 isn't too much different than the other T56's other than the input shaft, bellhousing, and slave setup. I don't know if it helps you at all, but I swapped in an LTx T56 with my Gen1e SBC...I'm currently running hedman elite headers, haven't had any problems with clearance or anything like that if that's what you're looking at. I'm using the stock trans mount on the stock crossmember, not 100% sure about the LSx T56, but the LTx mount is identical to the 4L60e mount....

this is my article about swapping in the T56 which is about swapping from auto to manual, and its using the LTx T56, so it's not exactly what you're doing, but it might help a little bit...
http://www.gmtruckcentral.com/articles/t56.html