96TahoeDoug
I'm Awesome
Maybe he's being thoroughHopefully he's found some by now, it's been 8 years....
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Maybe he's being thoroughHopefully he's found some by now, it's been 8 years....
Low on cash and stopped off for a master's degree. He be backMaybe he's being thorough
Damn nice SuperSport sir.Mine are American Racing Super Novas,,,,,, 20x10 &20x9You must be registered for see images attachYou must be registered for see images attach
That is a possibility...Maybe he's being thorough
If he was low on cash before he started a master's degree he's even lower now!Low on cash and stopped off for a master's degree. He be back
That fitment was a result of wheel offset and nothing to do with drilling the hub.24S! What did you have to do to get those to tuck? Im trying to get 22s but they are saying they wont fit.
Assuming he already had a bachelor's and took 3 to master - was working 5 years. Couple real heartbreakers here leaving me dangling with no closure.That is a possibility...
If he was low on cash before he started a master's degree he's even lower now!
If he's been working 5 years he may have a couple dollars to spare, or he may have pursued a doctorate and be totally broke still....Assuming he already had a bachelor's and took 3 to master - was working 5 years. Couple real heartbreakers here leaving me dangling with no closure.
Lowered or bagged it ain't, but it
Like it a lot - is static drop? I shoulda got smaller fronts like you did. The 22x11 rears will tuck after a bit of lip roll.Here is mine with US Mags Ramblers, 20x8up front and 22x9 in the back
You must be registered for see images attach
I should have explained better when I replied to him. The rims were blanks of a certain offset that I had drilled to my pattern because they don’t sell the right offset if I remember correctly. I just can’t remember the offsetThat fitment was a result of wheel offset and nothing to do with drilling the hub.