Knuckle Dragger
Rascal *****
If you look at the swap thread you'll see I have already posted the info for the residual valve.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I guess I'm failing to understand how air can be pulled in without there being a leak? Mines worked great for a while, so I'm probably not going to jack with it. Wish this would have been mentioned at the beginning of the thread on how to do this.
I guess I'm failing to understand how air can be pulled in without there being a leak? Mines worked great for a while, so I'm probably not going to jack with it. Wish this would have been mentioned at the beginning of the thread on how to do this.
90halfton,
I'm not quite sure on it, either, but can reason that there would not be a leak if there was a constant upstream pressure pushing against some seal or otherwise seating some component. I see some manufacturers say that they're used to keep the shoes closer to the drums (to reduce pedal travel) and others that the slight pressure prevents fluid from coming in when the cylinders retract.
I don't know. I figured I'll use a disc/drum MC just in case.