Couple of different console styles for these trucks. Which one do you have?
It's this one in the attached photo.
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Couple of different console styles for these trucks. Which one do you have?
Stupid question... I searched and didn't find what I was looking for...
Can I use non power door panels in an electric window/lock truck? My stock door panels are shot and I need new ones, and the only ones I can find in the scrapyard are non power. I know I'd have to fill in the window crank hole, which is no big deal... But, any other issues? I have an 88 rcsb for reference.
It's this one in the attached photo.
You must be registered for see images attach
I would suspect that the consoles in the auto and manual transmission trucks were in the same location so that GM could use the same floor bolt patterns or brackets.
Here is a 1994 Blazer from a dealer site, maybe you can ballpark the location from the pictures.
Good luck, hope this helps.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Here you go...
http://www.corvettecapital.com/1994-Chevrolet-K-Blazer-Sport-Missouri-63303/5827444
That's one that I wouldn't mind having.