The Hoopty

[zayres29]

http://www.youtube.com/watch?v=DSSOHSCBSRM
just some pictures of useless crap until i can start work on the box
hopefully i can finally take care of that missing

You must be registered for see images

pics of the big 3

You must be registered for see images

 

[zayres29]

final box design i had to change pretty much everything so here it is

You must be registered for see images

You must be registered for see images

just the specs of the ported side (thats all that really matters) the sealed side is the same dimentions at 7" depth for 2.44cu ft ~3.2:1 ratio

You must be registered for see images

 

[DRAGGIN95]

http://www.youtube.com/watch?v=DSSOHSCBSRM
just some pictures of useless crap until i can start work on the box
hopefully i can finally take care of that missing

You must be registered for see images

pics of the big 3

You must be registered for see images

Big 3 look's great but please put some split loom on the power cable going from the alt. to the batt. the insulation on that type of wiring is pretty thin, and I have personally seen a truck burn up with that same type of wire laying on the intake and melting the insulation just enough to short out.

 

[darren250r]

That 98 grill requires the filler piece between the grill and bumper to mount correctly. It will straighten it out and close the gap at the hood too.

 

[zayres29]

That 98 grill requires the filler piece between the grill and bumper to mount correctly. It will straighten it out and close the gap at the hood too.

yeah i know i just havent gotten it yet

 

[zayres29]

more pictures of my console concept

You must be registered for see images

i wish i had proper tools

You must be registered for see images

You must be registered for see images

brace for the HU

You must be registered for see images

 

[zayres29]

wiring up switches

You must be registered for see images

front side

You must be registered for see images

 

[dropped93]

so what exactly are you doing? idk if i caught it earlier in the thread or not

 

[zayres29]

so what exactly are you doing? idk if i caught it earlier in the thread or not

im building like a half console because i hate the location of the radio this way i can rest my hand on my leg and control the radio instead of leaning halfway across the cab to change the vol
the switches are going to control various things in the truck the one switch by the HU is going to be for the remote wires for all the amps i havent 100% decided what the others are going to be for but there are 14 so i have plenty to work with

 

[dropped93]

okay, makes since now.