Tbi spacer?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

884x4310ci

I'm Awesome
Joined
Jun 17, 2016
Messages
368
Reaction score
125
Location
miramichi N.B.
Hey guys I am looking at the transdapt. Tbi spacers. And was wondering if they have the 2 inch opening?
Also is 2 hole or open spacer better?
Thanks.
 

98 Nitro

I'm Awesome
Joined
Apr 10, 2017
Messages
422
Reaction score
254
Location
Indiana
The CFM tech is the only one that was dyno tested and the only one I would buy. However I did not use one myself I did use the Hypertech power charger and recommended it.
 

nobears

I'm Awesome
Joined
May 23, 2014
Messages
129
Reaction score
35
I went with a specter 2 hole and a CFM tech pod spacer myself.
 

Schurkey

Supporting Member
Supporting Member
Joined
Jan 14, 2018
Messages
11,274
Reaction score
14,272
Location
The Seasonally Frozen Wastelands
I went with a specter 2 hole and a CFM tech pod spacer myself.

Do you have larger-than-stock throttle plates?

Pod spacer is probably wasted money in that case.

Worst case is that it's actually causing problems by producing a too-large fuel spray cone. But I haven't heard of that being a problem.

The Big Block 7.4L engines used the spacer because they used larger throttle plates. The injector got lifted up a little so that the spray cone would still reach the outer diameter of the bigger throttles. Without larger throttles, the spacer is not needed.
 
Top